LG Electronics HCS6300 setup guide Card 1 The STB is resetting, Set the Satellite OSD On or Off

Configuration Options via GUI (Cont.)

Set the Satellite OSD On or Off

1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the drop-down list of options.

2.Either:

•Click on the OSD On button at the right of the STB OSD On field to enable on-screen display for the video signal at the HDMI output.

•Click on the OSD Off button at the right of the STB OSD Off field to disable on-screen display for the video signal at the HDMI output. Note that the Ethernet video stream does not contain on-screen display.

Reset the Satellite STB

1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the drop-down list of options.

2.Click on the Reset button at the right of the Reset STB field to reset the satellite STB.

The system displays confirmation, for example:

Card 1: The STB is resetting...

After reset, the satellite STB resumes normal operation.

Read the STB Activation Status

1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the drop-down list of options.

2.Click on the Read button at the right of the STB Activation Status field to display the activation status—activated or not activated—of the satellite STB.

30 206-4122