REAR PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 | 9 | 10 | 11 | 12 |
1.CAMERA IN: Camera input ports for BNC cameras.
2.VIDEO OUT: Video output (BNC) to connect the system to a secondary monitor or DVR.
3.AUDIO IN: One 3.5" RCA port (mono) for recording audio from an audio capable camera (not included).
4.VGA: VGA port to connect the system to a VGA monitor.
5.LAN: Connect an Ethernet cable to connect the system to a router or switch (not included).
6.MOUSE: USB port to connect a USB or PS/2 mouse (PS/2 mouse requires USB adapter).
NOTE: Do not connect a USB flash drive to the "Mouse" port. The USB port on the front panel has been specifically designed for
7.ALARM IN: Alarm block to connect external alarm or motion devices (not included).
8.SPOT OUT: Video output to connect the system to an external monitor (not included). Spot Out mode only displays channels switching in an automatic sequence.
9.AUDIO OUT: One 3.5" RCA port (mono) for audio output.
10.RS422 / 485 / OUT: Connection block for an RS422/485 PTZ camera (not included).
NOTE: The RS232 ports are for development purposes only. A PTZ camera cannot be controlled from these ports.
11.DC 12V: Port for 12V DC 3A power supply (included).
12.Exhaust fan: Do not block. Keep clear to allow for proper ventilation.
5