Epson DH200 instruction manual Alarm, Record

Page 34

Using the Main Menu

• Press + enable/disable motion sensitivity.

3. Press ENTER to save your settings. Press

Disabled blocks are colored grey. Active

 

CANCEL/ESC to close remaining menu

blockswillbeturquoise-coloredwhenmotion

 

windows.

is detected. Move an object in front of the

 

 

ALARM

selected camera to test sensitivity and

 

 

enable/disable the appropriate blocks

 

 

Configure recording parameters for

• Press - to exit the grid

 

 

 

 

 

 

 

 

 

 

• Press WXto select All/Clear

 

 

 

 

 

 

alarm recording.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and then press +.

 

Select ALL.

 

NOTE: An external alarm device is not included

 

 

 

 

6. Press ENTER to save your

 

 

 

 

with the system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

settings. Press CANCEL/ESC

 

 

 

 

 

 

 

Clear.

 

 

 

 

 

to close remaining menu

 

 

 

 

 

 

 

 

 

 

 

windows.

 

 

 

 

 

 

 

RECORD

Configure recording parameters for each channel.

Figure 15.0 Record menu

To configure recording settings:

1.Press ST to select a camera.

2.Press WX to select an option and the press + / - to configure the following:

•USE: Select ON/OFF. If OFF, the selected camera(s) will not record.

•QUALITY: Select LOW, MIDDLE, HIGH, SUPER, and ULTRA.

•RATE: Select 1, 2, 3, 4, 5, 6, 7, 10, or 15 fps.

•AUDIO: Select ON/OFF. Audio capable cameras or microphones are required for audio recording.

•MOTION: Select ON/OFF. Motion Grid and sensitivity must be configured in the Motion menu. See “MOTION” on page 23.

Figure 16.0 Alarm menu

To configure alarm settings:

1.Under RECORD SETUP, press ST to select a camera. Press WX to select an option and press + / - to configure the following:

•USE: Select ON/OFF. If OFF, the selected camera(s) will not record.

•QUALITY: Select LOW, MIDDLE, HIGH, SUPER, and ULTRA.

•RATE: Select 1, 2, 3, 4, 5, 6, 7, 10, or 15 fps.

•AUDIO: Select ON/OFF. The number of audio input channels varies by model.

•INPUT: Select N.O/ N.C.

TIP!

When you have

configured settings for one camera, press

to apply the settings for the rest of the cameras!

24

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Digimerge Touch Copyright 2009 Digimerge Technology IncExpose this Unit to Rain or Moisture Installation Important SafeguardsService General PrecautionsFCC Class a Notice Features Table of Contents Backup Appendix a System Specifications Appendix C Setting Up Ddns Service Getting Started System comes with the following componentsBasic Setup Front Panel Front Panel cont’d Rear Panel Remote Control Navigation/MenuMouse Tips Mouse ControlTouch Panel Tips and Tricks Quick Setup Using the SystemUsing Quick Setup Using Quick Setup cont’d PasswordEnabling/Disabling Quick Setup On-Screen Display System shows the following for all display viewsRemote. The Virtual Remote gives you quick access to Using the Virtual RemoteRight-click anywhere on the screen to open the Virtual Many of the system’s features using only a USB mouseUsing the Virtual Keyboard PlaybackSetting the Time Time menuMulti-Screen Display Repositioning ChannelsSequential Setup Auto Sequence ZoomContinuous Recording RecordingEvent Recording Motion Motion assigned to channel 4 4CH model shownRecording Audio AlarmSchedule Recording Video LossView recorded video on the system through playback mode PlaybackSearch Time Search menuUsing the Main Menu System Main MenuDisplay Sequential SetupConfigure Sequential Setup Auto Sequence settings Press Enter to save your changes and exitCamera MotionAlarm RecordSchedule Under Alarm SETUP, configure the followingWith a mode selected, configure the following Set four recording modes in a daily or weekly scheduleStopping Scheduled Recording Overnight RecordingNetwork menu IP setup NetworkConfigure additional network settings Configure Digimerge Ddns settingsTo configure bandwidth settings Only the Admin can configure user authorities on the system Configure System settingsPassword is set to OFF SystemPress CANCEL/ESC to close windows USB flash drive only DiskUpdateinfo Backup USB Flash DriveUSB CD/DVD-RW External USB HDDSystem will prompt, Status no File Time Search and Backup Backup menuViewing Backup Video Backup video player fileUsing MCD Player McdPlayer main window image simulatedDVR Netview System RequirementsInstalling DVR Netview To install DVR NetViewUsing DVR Netview DVR NetView main screenDeleting a DVR Adding a DVREditing a DVR To delete a DVR Select a DVR from the list frameDVR NetView Main Screen DVR NetView main screenUnder the Sound tab, configure the following DVR NetView SetupClick Apply and then click OK to close the Setup menu Live Mode DVR IndicatorsChanging Channels Camera IndicatorsDisplay Views Onscreen DisplaySub-Menu Click anywhere on DVR NetView to close the sub-menuRight-click the DVR to view the sub-menu Clearing Health Status HealthHealth Report Health Report Color Codes PTZ PTZ controlRecording Remote RecordingPlayback mode default PlaybackPlayback Controls Remote PlaybackControl playback with the following buttons Remote Download Download windowLocal Playback File Naming ConventionsPlaying Backup Files Open Playback Mode and click SearchVirtual DVR Creating a Virtual DVRVirtual DVR Properties Editing a Virtual DVRDeleting a Virtual DVR To delete a Virtual DVR Select a DVR from the list frameConfiguring a Virtual DVR Virtual DVR IndicatorDrag the camera back to the DVR icon in the DVR Indicator Deleting Cameras from a Virtual DVRRemote Setup Remote Setup menuSequential Setup Auto Sequence Display optionsTo configure Motion options To configure Camera optionsCameramotion To configure continuous recording options Record optionsMotion Select ON/OFF Networkemail DhcpDdnssystem Ddns optionsTimecontrol DVR Appendix a System Specifications16 x 1.0Vp-p, CVBS, 75ohms, BNC Dimensions DVR cont’dWhat Do I Need? Appendix B Setting UP Remote ViewingNetwork Setup / Remote Access Overview Not IncludedHow Do I Find My IP and MAC addresses? Finding Your External IP AddressHow Do I Enable Port Forwarding? 7000Appendix C Setting UP Ddns Service Create a Ddns accountUsername Domain name Password How Do I Enable Ddns On My System? Appendix D Connecting PTZ Cameras Connecting a PTZ camera not includedUsing a PTZ Camera Button Compatible PTZ Cameras Appendix E Connecting Additional External Monitors Appendix F Connecting Motion / Alarm Devices Appendix G Full Connectivity Diagram Appendix H Replacing the Hard Drive Remove the hard drive from the housingRemoving the Hard Drive Replacing the Hard Drive Place the HDD on the rubber mounting feetFormatting the Hard Drive HDD formatAppendix I Using LISTEN-IN Audio Line OUT / Amplified SpeakersAppendix J Converting Video Files to AVI AVI ConverterPlaying AVI Files File playback in Windows Media Player image simulatedAppendix M Remote Viewing Using Internet Explorer Using Live Viewer DVR Properties Appendix N DVR Properties and LOG FilesCMS Log List DVR Log List Advanced SearchTroubleshooting Error Possible Causes SolutionsTroubleshooting cont’d Limited Warranty Canada Need HELP?
Top Page Image Contents