Epson DH200 instruction manual Setting the Time, Time menu

Using the System

Setting the Time

It is highly recommended to set the time on the system prior to doing any recording. NOTE: All recording must be stopped on the system in order to set the time.

Figure 5.0 Time menu

To set the date and time:

1. Stop recording on the system by pressing / on the front panel, or pressing the button on the remote control and enter your 6-digit system password (by default, 000000).

NOTE: If using the mouse, right-click and then click on the Virtual Remote.

2.Press the MENU button to open the system menu. Select SYSTEM and press the ENTER button. The System menu opens.

3.Select the TIME tab.

4.Select DATE and enter the date (mm/dd/yyyy).

5.Select TIME and enter the time (hh/mm/ss).

NOTE: If using the mouse, use the Virtual Keyboard to enter the date and time.

6.Press the ENTER button to save your changes.

7. Press / on the front panel, or press the button on the remote control to resume Continuous Recording.

NOTE: If using the mouse, right-click and then click on the Virtual Remote.

13