Epson DH200 instruction manual Backup, USB Flash Drive

Figure 20.0 Backup menu—USB flash drive

BACKUP

Backup critical video data on your system to a USB flash drive, external USB HDD, or an external USB CD/DVD-RW drive (not included).

NOTE: The system supports most major brands of USB flash drives with a capacity of 10 MB ~ 4 GB. Most major brands of USB HDDs and CD/DVD-RW drives are supported.

USB Flash Drive

To backup recorded video:

1.Connect a blank USB flash drive to the USB port on the front panel.

2.Format the USB flash drive if you have not already done so. For details on formatting the USB flash drive, see “DISK” on page 30.

3.Press the BACKUP button on the front panel.

4.Under DEVICE, make sure to select USB (FRONT PANEL).

5.Under SELECT, select specific cameras or select ALL. Select NORMAL, ALARM, or MOTION recording. Select all boxes if desired.

6.Under RANGE, enter date and time for the system to scan for video. If the system finds a file, it will immediately begin backing up the

data. Monitor the backup progress in the ACTION frame.

NOTE: If there is no video available in the range, the system will prompt, "STATUS: NO FILE."

7.Under ACTION, select START and press ENTER.

8.Once backup is complete, press CANCEL/ESC to close remaining windows.

9.You will be prompted to re-start recording on the system. Press CANCEL/ESC to close the

prompt, and / to resume Continuous Recording; press / to resume Schedule Recording.

32