Epson DH200 Camera Indicators, Display Views, Changing Channels, Onscreen Display

Live Mode

Camera Indicators

Use the camera indicator for each connected DVR to change channels in full-screen and observe camera status.

Figure 24.1 DVR Indicator

• Blue: Video input is connected without recording

• Dark Blue: Video loss

• Red: Actively recording

Display Views

• Click the display mode buttons to the right of the main display screen to view channels in full-screen, quad, and various split-screen configurations

• If you have multiple systems connected, click buttons 25, 36, 49, and 64 to view the in large split-screen modes

• Double-click any channel to view it in single channel full-screen; double-click again to return to the previous split-screen mode

• While in split-screen, you can right-click any channel and select FULL SCREEN to view that channel in single channel full-screen mode

Changing Channels
If viewing a a system in full-screen, you can change
channels while in full-screen.
• Select your system from the DVR list at the bottom
		Figure 24.2 Display modes
of the main screen
• Double-click any of the displayed channels to view
that channel in full-screen—active channel will be
highlighted in red
• Click and drag a channel to another desired
location
Onscreen Display
• Click	to show/hide the onscreen
display

Figure 24.3 Click and drag channels in DVR NetView

44