Epson DH200 instruction manual Replacing the Hard Drive, Place the HDD on the rubber mounting feet

Page 93

Appendix H: Replacing the Hard Drive

Replacing the Hard Drive

To replace the hard disk:

1.Carefully position the new hard drive on the four rubber mounting feet in the housing. The connections end of the hard drive should face the data and power cables.

Figure 44.2 Place the HDD on the rubber mounting feet

2.With your hand supporting the hard drive, replace the four mounting screws underneath the housing.

3.Reconnect the cables to the hard disk. Make sure the cables are connected firmly.

4.Carefully replace the cover over the housing and slide towards the front panel. The cover should be flush on all sides.

5.Replace the screws on the rear panel: 3 short screws at the corners, 1 longer screws at the top, and 4 longer screws along the video ports.

6.Replace the short screws on the side panels.

7.Reconnect all cameras and cables. Re-mount the unit the back of your monitor if desired.

8.Power on the system. If you have installed a new hard disk, you must format the hard disk before using the system.

Figure 44.3 Reconnect the power and data cables

83

Image 93

Contents Copyright 2009 Digimerge Technology Inc Digimerge TouchExpose this Unit to Rain or Moisture Important Safeguards InstallationGeneral Precautions ServiceFCC Class a Notice Features Table of Contents Backup Appendix a System Specifications Appendix C Setting Up Ddns Service System comes with the following components Getting StartedBasic Setup Front Panel Front Panel cont’d Rear Panel Navigation/Menu Remote ControlMouse Control Mouse TipsTouch Panel Tips and Tricks Using the System Quick SetupUsing Quick Setup Password Using Quick Setup cont’dEnabling/Disabling Quick Setup System shows the following for all display views On-Screen DisplayRight-click anywhere on the screen to open the Virtual Using the Virtual RemoteRemote. The Virtual Remote gives you quick access to Many of the system’s features using only a USB mousePlayback Using the Virtual KeyboardTime menu Setting the TimeRepositioning Channels Multi-Screen DisplayZoom Sequential Setup Auto SequenceRecording Continuous RecordingEvent Recording Motion assigned to channel 4 4CH model shown MotionSchedule Recording AlarmRecording Audio Video LossPlayback View recorded video on the system through playback modeTime Search menu SearchSystem Main Menu Using the Main MenuConfigure Sequential Setup Auto Sequence settings Sequential SetupDisplay Press Enter to save your changes and exitMotion CameraRecord AlarmWith a mode selected, configure the following Under Alarm SETUP, configure the followingSchedule Set four recording modes in a daily or weekly scheduleOvernight Recording Stopping Scheduled RecordingNetwork Network menu IP setupConfigure Digimerge Ddns settings Configure additional network settingsTo configure bandwidth settings Password is set to OFF Configure System settingsOnly the Admin can configure user authorities on the system SystemDisk Press CANCEL/ESC to close windows USB flash drive onlyUpdateinfo USB Flash Drive BackupExternal USB HDD USB CD/DVD-RWSystem will prompt, Status no File Backup menu Time Search and BackupBackup video player file Viewing Backup VideoMcdPlayer main window image simulated Using MCD PlayerSystem Requirements DVR NetviewTo install DVR NetView Installing DVR NetviewDVR NetView main screen Using DVR NetviewEditing a DVR Adding a DVRDeleting a DVR To delete a DVR Select a DVR from the list frameDVR NetView main screen DVR NetView Main ScreenDVR NetView Setup Under the Sound tab, configure the followingClick Apply and then click OK to close the Setup menu DVR Indicators Live ModeDisplay Views Camera IndicatorsChanging Channels Onscreen DisplayClick anywhere on DVR NetView to close the sub-menu Sub-MenuRight-click the DVR to view the sub-menu Health Clearing Health StatusHealth Report Health Report Color Codes PTZ control PTZRemote Recording RecordingPlayback Playback mode defaultRemote Playback Playback ControlsControl playback with the following buttons Download window Remote DownloadFile Naming Conventions Local PlaybackOpen Playback Mode and click Search Playing Backup FilesCreating a Virtual DVR Virtual DVRDeleting a Virtual DVR Editing a Virtual DVRVirtual DVR Properties To delete a Virtual DVR Select a DVR from the list frameVirtual DVR Indicator Configuring a Virtual DVRDeleting Cameras from a Virtual DVR Drag the camera back to the DVR icon in the DVR IndicatorRemote Setup menu Remote SetupDisplay options Sequential Setup Auto SequenceTo configure Camera options To configure Motion optionsCameramotion Record options To configure continuous recording optionsMotion Select ON/OFF Dhcp NetworkemailDdns options DdnssystemTimecontrol Appendix a System Specifications DVR16 x 1.0Vp-p, CVBS, 75ohms, BNC DVR cont’d DimensionsNetwork Setup / Remote Access Overview Appendix B Setting UP Remote ViewingWhat Do I Need? Not IncludedFinding Your External IP Address How Do I Find My IP and MAC addresses?7000 How Do I Enable Port Forwarding?Create a Ddns account Appendix C Setting UP Ddns ServiceUsername Domain name Password How Do I Enable Ddns On My System? Connecting a PTZ camera not included Appendix D Connecting PTZ CamerasUsing a PTZ Camera Button Compatible PTZ Cameras Appendix E Connecting Additional External Monitors Appendix F Connecting Motion / Alarm Devices Appendix G Full Connectivity Diagram Remove the hard drive from the housing Appendix H Replacing the Hard DriveRemoving the Hard Drive Place the HDD on the rubber mounting feet Replacing the Hard DriveHDD format Formatting the Hard DriveLine OUT / Amplified Speakers Appendix I Using LISTEN-IN AudioAVI Converter Appendix J Converting Video Files to AVIFile playback in Windows Media Player image simulated Playing AVI FilesAppendix M Remote Viewing Using Internet Explorer Using Live Viewer Appendix N DVR Properties and LOG Files DVR PropertiesCMS Log List Advanced Search DVR Log ListError Possible Causes Solutions TroubleshootingTroubleshooting cont’d Limited Warranty Canada Need HELP?