Epson DH200 Appendix D Connecting PTZ Cameras, Connecting a PTZ camera not included

Page 85

APPENDIX D: CONNECTING PTZ CAMERAS

You can connect RS-422/485 PTZ cameras (not included) to the PTZ Control Block on the rear panel of the system.

DVR

PTZ CAMERA

(not included)

Figure 42.0 Connecting a PTZ camera (not included)

To install a PTZ Camera:

1.Connect the Transmit Cable to the RS-422/485 TX (+) port of the PTZ block on the rear panel.

2.Connect the Receive Cable to the RS-422/485 TX (-)port of the PTZ block on the rear panel.

3.Connect the video cable to a BNC port (usually channel 1).

4.Open the Main Menu and select CAMERA.

5.Under PTZ MODEL, select the model of your PTZ camera.

6.Under PTZ ID, select the PTZ ID (PTZ ID should match the camera channel to which you have connected the PTZ camera).

NOTE: The PTZ camera settings depend on the type of PTZ camera. Please refer to the specific camera manual for your brand and model of PTZ camera.

7.Press the ENTER button to save your settings.

75

Image 85

Contents Copyright 2009 Digimerge Technology Inc Digimerge TouchExpose this Unit to Rain or Moisture Important Safeguards InstallationGeneral Precautions ServiceFCC Class a Notice Features Table of Contents Backup Appendix a System Specifications Appendix C Setting Up Ddns Service System comes with the following components Getting StartedBasic Setup Front Panel Front Panel cont’d Rear Panel Navigation/Menu Remote ControlMouse Tips Mouse ControlTouch Panel Tips and Tricks Quick Setup Using the SystemUsing Quick Setup Using Quick Setup cont’d PasswordEnabling/Disabling Quick Setup System shows the following for all display views On-Screen DisplayRight-click anywhere on the screen to open the Virtual Using the Virtual RemoteRemote. The Virtual Remote gives you quick access to Many of the system’s features using only a USB mousePlayback Using the Virtual KeyboardTime menu Setting the TimeRepositioning Channels Multi-Screen DisplayZoom Sequential Setup Auto SequenceContinuous Recording RecordingEvent Recording Motion assigned to channel 4 4CH model shown MotionSchedule Recording AlarmRecording Audio Video LossPlayback View recorded video on the system through playback modeTime Search menu SearchSystem Main Menu Using the Main MenuConfigure Sequential Setup Auto Sequence settings Sequential SetupDisplay Press Enter to save your changes and exitMotion CameraRecord AlarmWith a mode selected, configure the following Under Alarm SETUP, configure the followingSchedule Set four recording modes in a daily or weekly scheduleOvernight Recording Stopping Scheduled RecordingNetwork Network menu IP setupConfigure additional network settings Configure Digimerge Ddns settingsTo configure bandwidth settings Password is set to OFF Configure System settingsOnly the Admin can configure user authorities on the system SystemDisk Press CANCEL/ESC to close windows USB flash drive onlyUpdateinfo USB Flash Drive BackupUSB CD/DVD-RW External USB HDDSystem will prompt, Status no File Backup menu Time Search and BackupBackup video player file Viewing Backup VideoMcdPlayer main window image simulated Using MCD PlayerSystem Requirements DVR NetviewTo install DVR NetView Installing DVR NetviewDVR NetView main screen Using DVR NetviewEditing a DVR Adding a DVRDeleting a DVR To delete a DVR Select a DVR from the list frameDVR NetView main screen DVR NetView Main ScreenUnder the Sound tab, configure the following DVR NetView SetupClick Apply and then click OK to close the Setup menu DVR Indicators Live ModeDisplay Views Camera IndicatorsChanging Channels Onscreen DisplaySub-Menu Click anywhere on DVR NetView to close the sub-menuRight-click the DVR to view the sub-menu Clearing Health Status HealthHealth Report Health Report Color Codes PTZ control PTZRemote Recording RecordingPlayback Playback mode defaultPlayback Controls Remote PlaybackControl playback with the following buttons Download window Remote DownloadFile Naming Conventions Local PlaybackOpen Playback Mode and click Search Playing Backup FilesCreating a Virtual DVR Virtual DVRDeleting a Virtual DVR Editing a Virtual DVRVirtual DVR Properties To delete a Virtual DVR Select a DVR from the list frameVirtual DVR Indicator Configuring a Virtual DVRDeleting Cameras from a Virtual DVR Drag the camera back to the DVR icon in the DVR IndicatorRemote Setup menu Remote SetupDisplay options Sequential Setup Auto SequenceTo configure Motion options To configure Camera optionsCameramotion Record options To configure continuous recording optionsMotion Select ON/OFF Dhcp NetworkemailDdns options DdnssystemTimecontrol DVR Appendix a System Specifications16 x 1.0Vp-p, CVBS, 75ohms, BNC DVR cont’d DimensionsNetwork Setup / Remote Access Overview Appendix B Setting UP Remote ViewingWhat Do I Need? Not IncludedFinding Your External IP Address How Do I Find My IP and MAC addresses?7000 How Do I Enable Port Forwarding?Create a Ddns account Appendix C Setting UP Ddns ServiceUsername Domain name Password How Do I Enable Ddns On My System? Connecting a PTZ camera not included Appendix D Connecting PTZ CamerasUsing a PTZ Camera Button Compatible PTZ Cameras Appendix E Connecting Additional External Monitors Appendix F Connecting Motion / Alarm Devices Appendix G Full Connectivity Diagram Appendix H Replacing the Hard Drive Remove the hard drive from the housingRemoving the Hard Drive Place the HDD on the rubber mounting feet Replacing the Hard DriveHDD format Formatting the Hard DriveLine OUT / Amplified Speakers Appendix I Using LISTEN-IN AudioAVI Converter Appendix J Converting Video Files to AVIFile playback in Windows Media Player image simulated Playing AVI FilesAppendix M Remote Viewing Using Internet Explorer Using Live Viewer DVR Properties Appendix N DVR Properties and LOG FilesCMS Log List Advanced Search DVR Log ListError Possible Causes Solutions TroubleshootingTroubleshooting cont’d Limited Warranty Canada Need HELP?