APPENDIX E: CONNECTING ADDITIONAL EXTERNAL MONITORS
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor Out displays the exact
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the system.
NOTE: A
Monitor
(not included)
DVR
Spot Monitor
(not included)
To use spot out functions: |
| |
| ||
1. | With a spot monitor connected, press the SPOT OUT button on |
|
| the remote control or Virtual Remote followed by the numeric |
|
| button for the channel you wish to view |
|
2. | Press the SPOT OUT button twice to begin Auto Sequence (by |
|
| default, Spot Out on the system is set to Auto Sequence). |
|
When an alarm is triggered, Spot Out will display the triggered |
| |
channel in | Figure 43.0 Spot Out button |
79