Teledyne THCD-100 instruction manual Relay Screen, Factory Defaults Confirmation Screen

Page 16

h)Relay Screen

This screen allows you to set the trip point for when the relay switches. The relay also contains some hysteresis to stop it ‘chattering’. This is configurable from this screen as well and is represented as a percentage of full scale of the input channel, with limits of 0.0% (i.e. no hysteresis) to 10.0%. If the second relay option is factory fitted then the above fields are duplicated for the second relay and are changed to Trip 1, Hyst 1 & Trip 2, Hyst 2 as appropriate.

Switch Functions:

Func

Go back to Main Menu screen

◄

Select previous character when in edit mode

►

Select next character when in edit mode

▲

Move edit field selection up

▼

Move edit field selection down

Zero

Go to edit mode for currently selected field

i)Factory Defaults Confirmation Screen

If Factory Defaults is selected from the Main Menu, this screen appears to ask for confirmation of the requested function. If confirmed then the screen changes to show a percentage of completion of the factory defaults and once completed the THCD-100 will restart.

Switch Functions:

 

Func

Go back to Main Menu screen

◄

If held, starts factory default when Zero is pressed

►

No function

▲

No function

▼

No function

Zero

Starts factory default if ◄ is held as well.

165-072011 THCD-100 Power Supply

Page 16 of 28

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Teledyne Hastings Manual Print History Table of Contents Specifications FeaturesGeneral Information Transducer socket Pinout 15 Pin D Type InstallationPin Number Designation Interface Socket Pin out Miniature 15 Pin D Type InterfaceSerial Socket Pinout 9 Pin D Type Pin Number Designation 1Power Connection Socket Panel MountingFeatures IntroductionAnalog Inputs Analog OutputsSetpoint Mode User Re-zeroAdaptive Filtering Setpoint SourceFilter Size Common Switch Functions Edit ModeMenu Screens Editable ScreensSwitch Functions Front Panel ScreensMain Screen not changing setpoint Main Screen changing setpointMain Menu Screen Switch FunctionsSetpoint Screen Input Screen Filtering ScreenComms Menu Screen Serial ScreenFactory Defaults Confirmation Screen Relay ScreenCommand/Query Format Serial CommunicationOutput Current Readings ‘r’ Main CommandsOutput Current Readings Repeatedly ‘rp’ Setpoint Mode ‘spm’ Setpoint Value ‘spv’Setpoint Source ‘sps’ Setpoint Initial Value ‘siv’Serial Commands Setpoint Initial Mode ‘sim’Serial Baud Rate ‘bra’ Serial Communication Protocol ‘pro’Channel Setup Commands Filtering CommandsRelay Control Commands Filter Size ‘fls’Relay Trip Point ‘rlt’ Relay Hysteresis ‘rlh’Other Commands Retrieve All Settings ‘ras’User Input Re-zero ‘irz’ Date of Last Factory Calibration ‘dlc?’Service & Calibration ServiceCleaning End of LifeAppendices Appendix aSetting Default Value Additional Information Appendix BAppendix C Settings in ‘ras’ command stringDescription Type and size Warranty Repair Policy WarrantyNon-Warranty Repair Policy
Top Page Image Contents