Runco PL-43DHD, PL-50DHD Controls and Functions, PlasmaWall at a Glance, Controls and Indicators

2. Controls and Functions

Figure 2-1shows the locations of the PlasmaWall front-panel controls and indicators.

2.1 PlasmaWall at a Glance

Controls and Indicators

1 2 3 4

Figure 2-1. PlasmaWall Front-Panel Controls and Indicators

1.POWER INDICATOR

-Lights green to indicate normal operation;

-Flashes green to indicate error conditions;

-Flashes green once per second when the power management feature is active.

2.STANDBY INDICATOR

-Lights red to indicate that the PlasmaWall is in standby mode;

-Flashes red to indicate error conditions.

3.DISPLAY STAND

Optional accessory for tabletop installations.

4.REMOTE CONTROL SENSOR

Receives the signals from the Setup remote control.

Runco PL-43DHD and PL-50DHD Owner’s Operating Manual 5