PlasmaWall Service Remote Control
PLASMAWALL |
| INPUT1 | |
PICTURE | SCREEN | SETUP | OPTION |
AUTO POWER OFF | : DISABLE | ||
COLOR TEMP. | : MIDDLE | ||
VIDEO NR | : MIDDLE | ||
MPEG FILTER | : MIDDLE | ||
CHROMA EE | : ON |
| |
CINEMA MODE | : OFF |
| |
COLOR SPACE | : RGB |
| |
CLAMP POSITION | : AUTO |
| |
SIGNAL | : 750p |
| |
SET | CHANGE | MENU | EXIT |
Figure A-2. PlasmaWall Setup Menu
To change the Noise Reduction setting on INPUT 1:
1.Press 1 to switch to PlasmaWall INPUT 1.
2.Press MENU on the PlasmaWall Service Remote Control.
3.Press 
or 
to select SETUP.
4.Press 
to select VIDEO NR, then press SET.
5.Press 
or 
to select the desired amount of noise reduction (OFF, LOW, MIDDLE or HIGH).
6.Press SET to confirm your selection.
Video NR (Noise
Reduction)
To change the MPEG Filter setting on INPUT 1: | MPEG Filter |
1.Press 1 to switch to PlasmaWall INPUT 1.
2.Press MENU on the PlasmaWall Service Remote Control.
3.Press 
or 
to select SETUP.
4.Press 
to select MPEG FILTER, then press SET.
5.Press 
or 
to select the desired amount of filtering (OFF, LOW, MIDDLE or HIGH).
6.Press SET to confirm your selection.
Runco |