DRC8335_EN(verB) 7/23/07 3:36 PM Page 20
VCR playback
Make sure the VCR is selected with the VCR indicator turned ON when using the remote control to perform the below operations. If the indicator is
off, press VCR on the remote control to activate the VCR.
| ||
VCR | Press this | |
indicator | ||
button | ||
|
Basic playback
1.Tune the TV to the AV channel connected with the unit.
2.Insert a tape in the tape deck.
3.Press PLAY/PAUSE (on the unit, under the tape deck) or PLAY (on the remote control) to start playback.
4.Press STOP/EJECT or STOP to stop playback.
5.Press STOP/EJECT or STOP again to eject the tape.
Advanced playback
¥Quick search Ð Press REV /FWD during playback to start backward or forward quick search. Press PLAY to resume normal playback.
¥Frame advance Ð Press PAUSE to pause playback. Press PAUSE repeatedly to advance frame by frame. Press PLAY to resume normal playback.
¥Slow motion Ð Press PAUSE and then
REV /FWD to start backward or forward slow motion playback. Press PLAY to resume normal playback.
¥Skipping Ð Press or during playback (or SKIP +/Ð on the unit) to skip to the previous or next recording on the tape.
¥Tracking Ð Press TRK Ð/+ repeatedly to remove any streaks from the picture, if necessary.
Reset counter
Press COUNTER RESET on the remote control to set the counter back to 0.
Repeat key
Tracking keys
Info banner key
VCR selection key
Playback control keys
Audio channel key
Go to zero
Press GO TO ZERO on the remote control to fast forward or rewind the tape to the point that you selected as the 0 point (above).
Audio channel
Press AUDIO during playback to change the audio to one of the following: stereo, left channel only, right channel only or mono. Channels available depend on the recorded program.
Repeat
Press PLAYMODE to select between repeat on and off. When repeat on is selected, the tape will be rewinded and played repeatedly when it comes to the end. When repeat mode is activated, all other playback operations will be disabled except the stop function.
Info banner
Press INFO to display or hide the info banner for checking the counter, playback time, audio setting and repeat mode.
Counter reset key Go to zero key
VCR control keys
18