RCA drc 8335 user manual DVD playback, Discs for playback

DRC8335_EN(verB) 7/23/07 3:36 PM Page 21

DVD playback

Discs for playback

DVD Video discs with region code 1 or ALL

DVD±R/RW discs, DVD±R discs (the discs must be finalized for playback)

CDs (Audio CDs, CD-R, CD-RW, mp3, jpeg discs)

Video CD discs (VCD, SVCD)

¥Discs for recording (DVD±R/RW) are not assigned region numbers.

¥You cannot play the following types of discs: Laserdiscs, CD-I, CD-ROM (computer only discs), discs recorded using other broadcast standards (i.e. PAL or SECAM), or DVD- RAM discs.

¥Some discs may not be compatible due to laser pickup and disc design.

Open/close key

Repeat key

Menu key

DVD selection key

EN

Make sure the DVD is selected with the VCR indicator turned OFF when using the remote control to perform the below operations. If the indicator is on, press DISC on the remote control to activate the DVD.

￿
VCR	Press this
indicator	button

Basic playback

1.Tune the TV to the AV channel connected with the unit.

2.Press STOP/OPEN (on the unit) or OPEN¥CLOSE (on the remote control) to open the disc tray.

3.Insert a disc in the disc tray. Press STOP/OPEN (on the unit) or OPEN¥CLOSE (on the remote control) to close the disc tray.

4.Press PLAY/PAUSE (on the unit, under the disc tray) or PLAY (on the remote control) to start playback.

5.Press STOP/OPEN (on the unit) or STOP (on the remote

control) to stop playback.

6. Press STOP/OPEN (on the unit) or OPEN¥CLOSE (on the remote control) to open the disc tray.

¥ The unit remembers the stopped point on a disc. When the disc starts to play again, the unit picks up from the stopped point unless the disc is unloaded or the unit is unplugged, or the STOP key is pressed twice.

Playback control keys

￿

DVD control keys

19