DRC8335_EN(verB) 7/23/07 3:36 PM Page 17
Recording
VCR recording
Make sure the VCR is selected with the VCR indicator turned ON when using the remote control to perform the below operations. If the indicator is
off, press VCR on the remote control to activate the VCR.
| ||
VCR | Press this | |
indicator | ||
button | ||
|
1.Insert a recordable tape into the tape deck.
2.If necessary, change the tape speed by pressing RECORD QUALITY on the remote control. The selected tape speed
shows briefly on the TV screen.
¥SP = Standard play, SLP = Super long play (around x2 to x3 the recording time as the tape indicates)
3.Refer to the instructions on page 14 to watch TV and change channel, or select viewing a device connected to your unit (e.g. camcorder).
4.Press VHS REC on the unit or REC on the remote control to start recording.
Make sure the safety tab of the tape is in place. |
|
Recording is not possible if the safety tab is | EN |
removed. If the safety tab | |
is removed and you want |
|
to record, simply cover the |
|
hole with adhesive tape. |
|
Safety tab |
|
Press either key to start VCR recording
5.Press PAUSE to pause recording. Press VHS REC or REC to resume.
6.Press STOP/EJECT or STOP to stop recording.
15