Sharp LC-46LB700X Inserting the batteries, Using the remote control unit, Remote control sensor

Preparation

Inserting the batteries

Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1Open the battery cover.

2 Insert the two supplied “AAA” size 3 Close the battery cover. batteries.

•Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•Do not mix batteries of different types. Different types of batteries have different characteristics.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

•Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

•Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.

Using the remote control unit

Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
	30º
30º	30º
Remote control sensor
	30º

5 m

Cautions regarding the remote control unit

•Do not subject the remote control unit to shock.

In addition, do not soak the remote control unit with liquids or place it in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.

•The remote control unit may not work properly if the remote sensor window of the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or TV, or operate the remote control unit closer to the remote sensor window.

17