Sharp LC-46LB700X Operating an Aquos Link device, Auto power on, Selecting recorder

AQUOS LINK

Auto power on Selecting channel key

If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

1Repeat steps 1 to 3 in AQUOS LINK control.

2Press a/b to select “Auto power on”, and then press ENTER.

AQUOS LINK control	Setting auto power on by AQUOS LINK
Auto power on
Selecting recorder
Selecting channel key
Using genre info.	On	Off

3Press c/d to select “On”, and then press

ENTER.

4Press MENU to exit.

NOTE

• The factory default for this item is “Off”.

This function allows you to select the channel of the connected HDMI device using the TV’s remote control unit.

1Repeat steps 1 to 3 in AQUOS LINK control.

2Press a/b to select “Selecting channel key”, and then press ENTER.

AQUOS LINK control	Setting channel select key for AQUOS LINK
Auto power on	compatible device via the HDMI input
Selecting recorder
Selecting channel key	INPUT1	On	Off
Using genre info.	INPUT2	On	Off
	INPUT3	On	Off

3Press a/b to select the input source of the connected HDMI device you want to control using the TV’s remote control unit, and then press ENTER.

4Press c/d to select “On”, and then press

ENTER.

Selecting recorder

Here, you can select a recorder for the recording from several connected recorders.

1Repeat steps 1 to 3 in AQUOS LINK control.

2Press a/b to select “Selecting recorder”, and then press ENTER.

AQUOS LINK control	Selecting recorder for recording
Auto power on		by [REC] button
Selecting recorder	Input	Location
Selecting channel key
	INPUT1	[1. 0. 0. 0]
Using genre info.
	INPUT2	[2. 0. 0. 0]

3Select the recorder, and then press ENTER.

4Press MENU to exit.

NOTE

•If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS Recorder, the external source’s indication changes (e.g. from “INPUT 1” to “INPUT 1 (Sub)”).

AQUOS LINK control	Selecting recorder for recording
Auto power on	by [REC] button
	Input	Location
Selecting recorder
Selecting channel key
	INPUT1	[1. 0. 0. 0]
Using genre info.
	INPUT1 (Sub)	[1. 1. 0. 0]
	INPUT2	[2. 0. 0. 0]

74

Using genre info.

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included in the digital broadcast.

1Repeat steps 1 to 3 in AQUOS LINK control.

2Press a/b to select “Using genre info.”, and then press ENTER.

3Press c/d to select “On”, and then press

ENTER.

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI- connected device with a single remote control unit.

1Press PLAY d to start playback of a title.

•See page 75, section “Playback of titles using AQUOS LINK” if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder.

2Press FWD J to fast forward. Press REV G to reverse.

Press STOP H to stop.

Press POWER to turn the HDMI-connected device on/off.

Press PAUSE F to pause. Press SKIP U to skip foward. Press SKIP T to skip reverse.

NOTE

• This function may not be available by a connected device.