Sharp LC-46LB700X operation manual Controlling Hdmi devices using Aquos Link

AQUOS LINK

Controlling HDMI devices using AQUOS LINK

What is AQUOS LINK?

Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifi er, DVD player/recorder, Blu-ray player/ recorder) using a single remote control unit.

What you can do with AQUOS LINK

✔ One Touch Recording (DTV only)

You do not have to search for the remote control unit of your recording device. Press the REC or REC STOP buttons inside the fl ip cover to start/stop recording what you see on the recorder.

✔ One Touch Play

While the TV is in standby mode, it will automatically turn on and play back the image from the HDMI source.

✔ Single remote control operation

AQUOS LINK automatically recognises the connected HDMI devices and you can control the TV and the devices as if using a universal remote control unit.

✔Operating Title list of external devices

In addition to displaying the TV’s own Timer list (Pages 45 and 46), you can also call up the external player’s Top menu or AQUOS BD Player’s/AQUOS Recorder’s Title list provided that the devices support AQUOS LINK.

✔Multiple control of HDMI devices

You can select which HDMI device to operate using the OPTION button.

NOTE

• When you use AQUOS LINK, make sure to use a certifi ed HDMI cable.

•Point the remote control unit toward the TV, not to the connected HDMI device.

•Video noise may occur depending on the type of HDMI cable used. Make sure to use a certifi ed HDMI cable.

•Up to three HDMI recording devices, one AV amplifi er and two players can be connected using this system.

•These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device and select the appropriate external source

using TV/VIDEO.

• When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confi rm that picture and audio are correctly output by selecting “INPUT1”, “INPUT2” or “INPUT3” from the “INPUT SOURCE” menu.

72