Sharp LC-46LB700X Communication Setup, Blu-ray disc Setup, Select Next, then press Enter

Blu-ray disc Setup

Communication Setup

This allows you to perform and/or change the communication setting. This setting is required to use BD-LIVE functions that connect to the internet.

NOTE

•Make sure that the ETHERNET cable is connected to this TV. (See page 16.)

•For manually performing the setting, the following information of the connected router or modem is required. Confi rm the information prior to the setting.

–IP address, netmask, gateway, DNS address

•Besides, if specifying a proxy server, the following information specifi ed from your internet service provider is also required. Confi rm the information prior to the setting.

–IP address and port number of the proxy server

1Press MENU to display the MENU screen, and then press c/d to select “Option”.

2Press a/b to select “Blu-ray disc Setup”, and then press ENTER.

3Press a/b to select “Communication Setup”, and then press ENTER.

4Press ENTER.

5Press c/d to select “Change”, then press

ENTER.

Setting the info. of the Ethernet

[Current Setup]

IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup
Proxy	: Not Use
Change		Initialize

•For initializing the current setting, select “Initialize”, then press ENTER.

6For setting the IP address, press c/d to select “Yes” or “No”, then press ENTER.

Do you obtain the IP address

automatically?

Yes No

IP Address

Netmask

Gateway

Next

•If selecting “Yes”: The IP address is automatically obtained. (Go to the step 10.)

•If selecting “No”: The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 68.)

Regarding each of the setup values, confi rm the specifi cations of your broadband router.

7Select “Next”, then press ENTER.

8Enter your DNS address.

Enter your DNS address

Primary

Secondary

Next

•The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 68.)

Regarding each of the setup values, confi rm the specifi cations of your broadband router.

9Select “Next”, then press ENTER.

10	For setting the proxy server, press c/d to
	select “Yes” or “No”, then press ENTER.
			Do you use the proxy server?
			Yes		No
		Address
		Port
				Next
	•	If selecting “Yes”: The IP address or proxy server
		name and port number for the proxy server
		specifi ed from your internet service provider are
		entered using the screen for inputting characters.
		(See page 68.)
	•	If selecting “No”: Go to the next step.
11	Select “Next”, then press ENTER.

66