Sharp LC-46LB700X Energy conservation settings, Auto power-off at a designated time, Energy save

Watching TV

Energy conservation settings

Auto power-off at a designated time

This function is conveniently used when, for instance, going to bed while watching TV.

1Press SLEEP.

•Remaining time displays when sleep timer has been set.

Sleep Timer: Remain 2 hr. 00 min.

2Each time you press SLEEP, the remaining time switches as shown below.

0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.

Off 2 hr. 30 min. 2 hr. 00 min.

NOTE

•When the time has been set, countdown automatically starts.

•Five minutes before the preset of time expires, the remaining time displays each minute.

•Select “Off” by pressing SLEEP to cancel the sleep timer.

Energy save

This function enables you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span.

1Press MENU and the MENU screen displays.

2Press c/d to select “ECO”.

• ECO menu displays.

3Press a/b to select “Energy save”, and then press ENTER.

4Press a/b to select “Standard” or “Advanced”, and then press ENTER.

Selected item	Description
Standard	Reduces the backlight brightness by
	25%.
Advanced	Reduces the backlight brightness by
	50%.
Off	The backlight brightness is the same
	value of your settings in the selected “AV
	MODE ”.

Blu-ray disc Ecology

ECO picture control

This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged.

1Press MENU and the MENU screen displays.

2Press c/d to select “ECO”.

• ECO menu displays.

3Press a/b to select “ECO picture control”, and then press ENTER.

4Press c/d to select “On” or “Off”, and then press ENTER.

NOTE

•This function does not work when “AV MODE” is set to “DYNAMIC (Fixed)” or “AUTO”.

•This function does not work when “Energy save” is set to “Standard” or “Advanced”.

You can control the power on/off status of the Disc Drive when power to the TV is on.

1Press MENU and the MENU screen displays.

2Press c/d to select “ECO”.

• ECO menu displays.

3Press a/b to select “Blu-ray disc Ecology”, and then press ENTER.

4Press c/d to select “Enable” or “Disable”, and then press ENTER.

Selected item	Description
Enable	Power to Disc Drive is turned on when a
	disc is inserted or when the input source
	is switched to Blu-ray.
Disable	Power to Disc Drive is turned on when TV
	power is turned on.

32