Sharp LC-46LB700X operation manual Mounting the TV on the wall, Removing the stand

Appendix

Mounting the TV on the wall

Removing the stand

For wall mounting with the optional bracket (AN-52AG4), remove the stand.

Before detaching/attaching the stand

•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Lay the TV down on cushioning (such as a blanket) over a table.

•Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

1 2

1 Unfasten the four screws used to secure the stand in place.

2 Attach the wall mount brackets.

1 Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

2 Make sure do detach the TV with it tilted slightly backwards and supporting the knobs on the rear of the TV while holding the stand.

3 Don’t push hard on the speaker cover portion of the TV.

3

Set the TV on the wall.

As the TV is very heavy, be careful not to drop it on a hard fl oor or on your foot.

NOTE

• To attach the stand, perform the above steps in reverse order.

93