Sharp LC-46LB700X Teletext language setting, Displaying Subpages, Time display, Teletext function

Teletext function

Teletext language setting

If Teletext information does not display correctly, perform the procedure below.

Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic.

Each table is compatible with the Teletext languages listed below.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Text language”, and then press ENTER.

4Press a/b to select receivable teletext broadcasting language in your country.

MENU [Setup ... Text language]

Teletext language settings

West Europe

East Europe

Greek/Turkish

Cyrillic

•West Europe – English, French, Scandinavian, Czech, German, Spanish, Italian

•East Europe – Polish, French, Scandinavian, Czech, German, Slovenian/Croatian, Italian, Rumanian

•Greek/Turkish – English, French, Scandinavian, Turkish, German, Spanish, Italian, Greek

•Cyrillic – English, Russian, Estonian, Czech, German, Spanish, Ukrainian, Lettish

NOTE

•Teletext can display only when it is sent by a network. Not used to convert between languages.

Displaying Subpages

You can display subpages as they are transmitted.

1Press m to display Teletext.

2Press 1 to display the subpage as shown below.

Subpage screen

–+

3Select the desired subpage by using CHr/ CHs, Red or Green.

• 0 – 9 directly selects the desired subpage.

4Press 1 to exit the subpage screen.

Time display

You can display the time information included in the Teletext broadcast.

1Select a TV channel providing Teletext information.

(The time information is automatically captured.)

2Press DISPLAY. The channel display will appear on the display.

3Press DISPLAY again. The channel display about three seconds on the screen. Time information will continuously display on the lower right of the screen.

4Even when you change the TV channel, you can display the time information with steps 2 to 3 above.

NOTE

• The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 to 4 again.

• If acquired successfully the time information will appear in

the upper-right corner of the screen by pressing MENU.

83