Sharp LC-46LB700X Selecting a preset AV Mode, Using AV Mode on the remote control unit, Fixed

Watching TV

Selecting a preset AV MODE

The AV MODE function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment.

Using AV MODE on the remote control unit

1Press AV MODE.

• Present AV MODE displays.

2Press AV MODE again before the mode displayed on the screen disappears.

• The mode changes as shown below.

When the input source is TV, Blu-ray,

INPUT4, 5 or 6 terminal (Example)

Selected item	Description
STANDARD	For a highly defi ned image in a normally
	bright room.
MOVIE	For a movie.
GAME	Lowers image brightness for easier
	viewing.
PC*	For PC. (Available only when inputting an
	HDMI or RGB signal.)
USER	Allows the user to customise settings as
	desired. You can set the mode for each
	input source.
AUTO	The TV automatically sets the appropriate
	selection from the “AV MODE” menu
	depending on the lighting conditions and
	the type of programme watched.
DYNAMIC	Changes the image and sound settings to
(Fixed)	the factory preset values. No adjustments
	are allowed.
DYNAMIC	For a clear-cut image emphasising high
	contrast for sports viewing.

AV MODE: STANDARD

AV MODE: DYNAMIC

AV MODE: DYNAMIC (Fixed)

AV MODE: AUTO

AV MODE: MOVIE

AV MODE: GAME

AV MODE: USER [TV]

NOTE

•The item marked with * is available only when selecting “INPUT1”, “INPUT2”, “INPUT3” or “INPUT7” from the INPUT SOURCE menu.

•If you select “AUTO”, some selections in the “AV MODE” menu may not be automatically set.

When the input source is INPUT1, 2, 3 or 7 terminal

(Example)

AV MODE: STANDARD	AV MODE: MOVIE
AV MODE: DYNAMIC	AV MODE: GAME
AV MODE: DYNAMIC (Fixed)	AV MODE: PC
AV MODE: AUTO	AV MODE: USER [ ]

35