Sharp LC-46LB700X operation manual Connecting a PC, Hdmi Connection, Analogue Connection

Connecting a PC

Use the PC terminals to connect a PC.

HDMI Connection

PC

PC

HDMI cable (commercially available)

DVI/HDMI conversion cable INPUT 2 or INPUT 3 (commercially available)

INPUT 1*

3.5mm stereo minijack cable (commercially available)

*When using the INPUT 1 terminal, you must select the proper item in the “PC audio select” menu depending on the type of HDMI cable connected. (See page 78.)

NOTE

•The PC INPUT terminals are DDC1/2B-compatible.

•Refer to page 81 for a list of PC signals compatible with the TV.

Analogue Connection

PC

PC

3.5mm stereo minijack cable (commercially available)

RGB cable (commercially available)

INPUT 7*

3.5mm stereo minijack cable (commercially available)

RGB/DVI conversion cable (commercially available)

INPUT 7*

* When using the INPUT 7 terminal, you must select “INPUT7(RGB)” in the “PC audio select” menu. (See page 78.)

Signal names for 15-pin mini D-sub connector

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

Pin No.	Signal name	Pin No.	Signal name	Pin No.	Signal name
	R		GND (Ground)		Not connected
	G		GND (Ground)		SDA
	B		GND (Ground)		HD
	Not connected		+5V		VD
	CSYNC		GND (Ground)		SCL

NOTE

•Macintosh adaptor may be required for use for some Macintosh computers.

•Pin No. 5 is not used for inputting the signal.

77