Sharp LC-46LB700X Still image playback or frame, To playback mode for BD and DVD discs

Appendix

Troubleshooting-Disc Playback (continued)

	Problem		Possible Solution
•	Still image playback or frame	•	Frame advance playback on discs other than DVD-RW/R (VR format) may not work
	advance playback does not work		properly.
	properly.	•	Some commercially available BD-VIDEO and DVD-VIDEO discs are not compatible
			with still image playback or frame advance playback.
		•	On BD-VIDEO discs, frame reverse playback does not work.
•	Fast forward/reverse (search)	•	Depending on the disc and the scene being played, the speed of fast forward may
	does not work properly.		not be as described in this manual.
		•	Search across different titles is not possible. Except for audio CDs, the TV will switch
			to playback mode for BD and DVD discs.
•	Slow playback does not work	•	At the end of a title, slow playback will be canceled.
	properly.	•	Slow playback across different titles is not possible.
		•	With BD-VIDEO discs, reverse slow playback is not possible.
•	Cannot play DVD discs recorded	•	Discs that were not fi nalized on the other equipment may not play in this TV. Finalize
	on other equipment.		the disc in the recorder that was used to create it.

•Discs in formats not supported by this TV, such as discs recorded with a high- defi nition digital video camera cannot be played in this TV.

•Discs created on a computer may not play in this TV.

•The disc is automatically ejected. • Make sure that region code on the disc matches that of this TV.

•Make sure that the disc is playable.

•Make sure that the disc is loaded properly. The disc should be loaded with the playback side facing the back of the TV.

•Take out the disc and clean it.

• Disc cannot be ejected.	• Turn power off the main power, and then turn power on again.
	After the power indicator has come on, press (EJECT) on the TV or EJECT on the
	remote control unit.

•If the above steps do not resolve the problem, please contact your dealer or an authorized service center.

•	The TV makes a snapping sound	•	The TV may sometimes make a snapping sound when starting playback if it has not
	when starting playback or loading		been operated in a while.
	a disc.		These sounds are not malfunctions of the TV but are normal operating conditions.
•	Pressing MENU does not bring	•	If a message appears, follow the instructions in the message.
	up a menu.
•	A MiniDisc (MD) recorder is	•	If the pauses between tracks on the CD are short, the track numbers on the MD may
	connected to the TV via a digital		be different.
	link. When recording songs from	•	In cases such as when tracks were specifi ed using an on-screen menu, the track
	a CD onto MD, the track numbers		numbers on the MD may be different.
	are incorrect.

87