Sharp LC-46LB700X operation manual PC audio select, Displaying a PC image on the screen

Connecting a PC

PC audio select

When using the INPUT 7 terminal or INPUT 1 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input.

Selected item	Description
INPUT1(HDMI)	When connecting devices (including a PC) with DVI/HDMI cable to the INPUT 1 terminal and inputting
	analogue audio signals from the AUDIO (R/L) jack.
INPUT7(RGB)	When connecting a PC to the INPUT 7 terminal, and inputting analogue audio signals from the AUDIO
	(R/L) jack.

NOTE

•You must set this to “INPUT7(RGB)” when connecting devices (including a PC) with an HDMI-certifi ed cable to the INPUT 1 terminal. If “INPUT1(HDMI)” is set, there will be no sound output.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size as illustrated below.

a

Screen size images.

1Press WIDE.

• The WIDE MODE menu displays.

WIDE MODE

Normal

Cinema

Full

Dot by Dot

(Example)

2Press WIDE or a/b to select a desired item on the menu.

NOTE

•Connect the PC before making adjustments.

•Selectable screen size may vary with input signal type.

Input Signal

1024g768

Input Signal

1360g768

Normal Cinema Full Dot by Dot

Keeps the original		For viewing wide	An image fully fi lls the		Detects the resolution
aspect ratio in a full		screen programs.	screen.		of the signal and
screen display.		The top and bottom			displays an image
		of the image is			with the same
		slightly cropped.			number of pixels on
					the screen.
	Normal			Full		Dot by Dot

Keeps the original	An image fully fi lls the	Detects the resolution
aspect ratio in a full	screen.	of the signal and
screen display.		displays an image
		with the same
		number of pixels on
		the screen.

78