Sharp LC-46LB700X operation manual Press Enter to start checking data in the USB memory device

Blu-ray disc Setup

Software Update (continued)

1Insert the USB memory device with the update fi le into the BD STORAGE/SERVICE terminal on the Disc Drive of this TV.

2Press MENU to display the MENU screen, and then press c/d to select “Option”.

3Press a/b to select “Blu-ray disc Setup”, and then press ENTER.

4Press a/b to select “Software Update”, and then press ENTER.

• If you have not yet set the PIN code, go to step 6.

Audio Video Settings

Playback Setting

Communication Setup

Version

USB Memory Management

Software Update

5Press ENTER to start checking data in the USB memory device.

Insert USB memory device containing the software update file.

Use BD STORAGE/SERVICE port.

OK

• If the USB memory device is not properly installed or the correct update fi le cannot be found on the USB memory device, an error message is displayed.

Check the fi le on the USB memory device, and then reinsert the USB memory device correctly.

Software update file is not detected in the USB memory device. Confirm that you have transferred the file to the

USB memory device and retry software update.

Confirm that you have inserted the USB memory device

into the BD STORAGE/SERVICE port.

OK

There is no software update file

in the USB memory device.

Confirm that you have transferred the file

to the USB memory device and retry software update.

OK

The software version on the USB memory device

is already installed.

Reconfirm the software version and reinstall

(if necessary).

OK

6 During the data checking, “Checking” blinks. 7

Now checking the data in USB memory device.

Checking

•The current version of the Disc Drive software and the version of the update fi le on the USB memory device are displayed. To update the Disc Drive software with update fi le, select “Yes”, and press

ENTER.

Software update file is detected in the USB memory device.

Start update?

Current Ver. :	xxxxxxxxx
Update Ver. :	xxxxxxxxx
	Yes	No

Press ENTER to start updating.

•The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until the software update display appears.

Wait several minutes and do not unplug the AC cord.

OK

Now Updating

Do not unplug AC cord.

Update Version xxxxxxxxx

30%

8When the software is successfully updated, a screen is displayed indicating that the update process is completed.

•If the update has failed, check the fi le in the USB device and try Software Update again.

9

10

Press POWER on the TV to turn off the TV.

Remove the USB memory device.

71