Sharp LC-46LB700X Manual picture settings, Picture adjustment, Using OPC on the menu screen

Watching TV

Manual picture settings

Picture adjustment

You can adjust the picture to your preference.						Selected item	c button	d button
Follow the steps to adjust the picture.
						OPC	Sets whether or not the screen brightness
							is automatically adjusted according to
							the lighting condition in the room. (OPC
							setting: See this page.)
						Backlight	The screen dims	The screen
								brightens
						Contrast	For less contrast	For more contrast
1	Press MENU and the MENU screen displays.					Brightness	For less brightness	For more brightness
						Colour	For less colour	For more colour
							intensity	intensity
2	Press c/d to select “Picture”.					Tint	Skin tones become	Skin tones become
	MENU [Picture]						purplish	greenish
	Picture			Audio	ECO	Sharpness	For less sharpness	For more sharpness
	DYNAMIC					Advanced	For fi ner picture adjustments. (See page
	OPC				[Off]
							37 and 38.)
	Backlight	[+14]		–16	+16
	Contrast	[+30]		0	+40	Reset	Resets all picture adjustment items to the
	Brightness	[	0]	–30	+30		factory preset values.
	Colour	[	0]	–30	+30
	Tint	[	0]	–30	+30	H OPC (Optical Picture Control) setting
	Sharpness	[	0]	–10	+10
						You can set the TV to automatically adjust the screen
	Advanced
	Reset					to suitable backlight brightness according to the
						lighting conditions.

3Press a/b to select the desired menu item. Press ENTER to proceed if necessary.

4Press a/b or c/d to select the desired item or adjust the item to the desired level. Press ENTER if necessary.

NOTE

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.

•Select “Advanced” and then press ENTER to set “C.M.S.- hue”, “C.M.S.-saturation”, “C.M.S.-value”, “Colour temp.”, “Fine motion advanced”, “Film mode”, “Active contrast”, “DNR”, “3D-Y/C”, “Monochrome” or “Range of OPC”. See page 37 and 38.

Using OPC on the remote control unit

Press OPC to switch the OPC function on or off.

Using OPC on the menu screen

Selected item	Description
Off	The brightness is fi xed at the value set in
	“Backlight” (See this page).
On	Automatically adjusts.
On: Display	Displays the OPC effect on the screen
	while adjusting the brightness of the
	screen.

NOTE

•Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

36