TechniSat DigiCorder S1 Programme selection Using the programme up/down keys, Selecting a list

Page 23

downloaded to the receiver. To do this, switch the unit on and switch to reception of a major channel, such as ZDF, that broadcasts a time signal, for about 30 seconds, to acquire the current time automatically.

7.2 Programme selection

7.2.1 Using the programme up/down keys

>Use the programme up/down keys either on the unit or on the remote control to move up or down by one programme slot at a time.

7.2.2 Using the numeric keys

>Use the numeric keys to enter the desired program-

 

me number.

 

For example:

 

1

 

for programme slot 1

1,

then 4

for programme slot 14

2,

then 3,

then 4 for programme slot 234

When entering programme numbers of more than one digit, you have approx. 3 seconds time after pressing a key to complete the entry.

If you wish to enter a number consisting of only one or two digits, you can speed up the switching procedure by holding down the key a little longer on the last digit.

7.2.3 Using the Navigator (Programme list)

>Press OK.

The programme list navigator will be displayed. In TV mode, only TV programmes will be shown, while only radio programmes will be shown while in Radio mode. The currently selected programme will be highlighted. (Fig. 7-1)

>Now, use the up/down arrow keys to mark the selec-

ted programme.

(Fig. 7-1)

>Press OK to switch reception to the desired program- me.

>Use the up/down arrow keys to move around the list one programme slot at a time.

>Use the left/right arrow keys to move around the list one page at a time.

7.2.3.1 Selecting a list

To facilitate the finding of programmes, your receiver is equipped with several programme lists. You have the choice of selecting your Favourites list (see Point 8.1), or you can use the alphabetically sorted Total list, or you can view a list sorted by Providers.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DiSEqC DigiCorder S1Contents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitVideo Sehr geehrte Kundin, sehr geehrter Kunde Important notes on operating the unit Please read this firstHelp Safety notesDisposal information Temporary disconnectionVCR Connecting the DVB receiver to a satellite InstallationVia Scart cable ConnectionsSingle unit operation Connection to a television setHiFi Amplifier Analogue Via HF cableVideo cassette recorder VCR Serial Interface RS Initial installationDigital Unit with S-Video input HosidenPosition A/Option a Country settingAntenna configuration DiSEqCScanning for programmes Position B/Option BUpdating software Operating language SettingsWhen the scan is completed Exiting from the installation assistantCountry Basic settingsRemote control code Time difference GMT hoursPicture format TV set Audio/Video settingsLanguage Audio signal TV Scart modeUHF output channel Video systemDolby Digital AC3 Setting the switching matrix Antenna settingsSwitching DiSEqC on and off Additional settings/LNC characteristics Rotary antenna Switching on and offOperation Selecting a list Programme selection Using the programme up/down keysUsing the numeric keys Using the Navigator Programme listReception of encrypted programmes Accessing blocked programmesInformation box Selecting a starting time Special functionsMultifeed options Selecting another language Volume controlDolby Digital AC3 mode Additional programme information TV/Radio switchingRevert to last programme selected Display time and programme informationFreeze frame Teletext Using the teletext decoder of your television setUsing the internal video text decoder Transponder informationElectronic Programme Guide SFI SiehFern Info Mixed modeStop mode Sub-titlesDownloading SFI data Interrupting download procedureAccessing electronic programme guide More Now table with current programme contentsNext SFI Info SFI timer programmingPress the red function key Timer to open a selection window SFI functionsSFI overview by programme type genre SFI programme overviewRecording Timer-controlled recordingExiting from SFI Hard drive operationOption Instant recording Start and end recording manuallyStarting a recording manually and ending it auto Matically Timer recordingsHard drive timer Video recorder timerDate Manual timer programmingProgramme change timer SourceRepeat Timer overviewChanging timer programming StopPress the green function key Delete Deleting timer programmingProgramming a new timer event Timeshift functionTime PlayPlaying hard drive recordings Managing the hard drive Pause/Freeze frameFast forward and Reverse Ending PlayDelete Managing recordingsHard drive information Hard drive managementChanging basic programming Sleep timerConfiguring the Favourites list Providers Calling up programme list managementUse the left/right arrow keys to select Yes or No Adding programmes to the Favourites listPress the blue function key Functions Marking blocks of programmesNow pres the yellow function key Sort. a double Deleting from the Total listSorting programmes Press the blue function key Functions. a window willSelecting a programme Programming the electronic programme guideSFI channel Start categoryChanging the unit PIN Parental controlFunction key ModeAutomatic scan Programme scanSatellite Satellite scanTransponder scan Press the red function key Start scanAfter the scan Scan modeManual scan Unsorted Service settingsService settings SortedUpdating software Activate default settingActivate default setting Delete all programmesManual initialising of the CI module Copying the settingsSystem configuration Encryption systemLNC test Operating a rotary antenna installation DiSEqCEastern and Western limits Deleting existing limitsDelete lim Setting Western limitSet Eastern limit Geo positioningLat Setting a satellite positionNow press the arrow key left First decimal pointSetting user-defined satellite positions User satellite Automatic fine adjustment Autofocus Adjusting the satellite antennaTest transponder/LNC configuration Manual adjustment of antennaOrbital position xx found. Save satellite ? Fig Saving a satellite positionCurrent satellite list Selecting a satellite positionReference position Technical TermsDelete satellite position LNB/LNC Low Noise block converter FrequencyFrequency range Co-axial cableSatellite receiver Software updateService voltage Receiver see satellite receiver SatellitePLL modulator Antenna input Antenna output Technical dataDBS tuner Demultiplexing Common InterfaceTeletext LNC power supplyOutput digital Video parameters OutputProgramme memory/satellite positions TimerRemote control system RC-5 Power supply Mains adapter Power requirementProblem Possible cause Solution Troubleshooting guideNeously, and keep them Town/city Geogr. longitude E Geogr. latitude N Annexu Co-ordinates of some German cities1Town/city Geogr.longitude E Geogr. latitude N Co-ordinates of some German citiesAC3 IndexSFI Page For everyday operation Using the programme list34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents