TechniSat DigiCorder S1 Operating a rotary antenna installation DiSEqC, Deleting existing limits

Page 57

9 Operating a rotary antenna installation (DiSEqC 1.2)

Your digital receiver is ready to operate a motorised rotary antenna installation The DiSEqC control function (DiSEqC level 1.2) allows you to control a suitable motor via the co- axial cable.

>Call up the menu Antenna settings as described under Point 6.4 (Fig. 9-1) and switch the DiSEqC control (Point 6.4.1) to on.

>Now use the up/down arrow keys to select the DiSEqC position (e.g. A/B 3) to which you wish to allocate the motorised antenna.

>Press OK to open a window allowing you to select a Satellite resp. the option Motor antenna. (Fig. 9-2)

>Use the up/down arrow keys to select the line Motor antenna and confirm by pressing OK.

>Confirm the screen prompt (Fig. 9-3) regarding the setting or Eastern and Western limits by pressing OK.

9.1 Eastern and Western limits

To avoid potential mechanical damage to the dish antenna or the LNC by any obstacles, you must first determine the maximum range of movement/rotation in both an easterly and westerly direction. If there are any obstacles within the rotating range of the antenna, such as walls or chimnies,these must definitely be considered when setting the easterly and westerly limits.

If there are no obstacles within the rotating range of the dish, then set the limits of the rotation in such a manner that the dish can move a little further than is strictly speaking required to receive signals from the most extremely positioned satellites.

9.1.1 Deleting existing limits

You should first of all delete any existing limit settings.

>Use the left/right arrow keys to mark the column

LNC test.

>In the line Motor antenna use the up/down arrow keys to mark the field Continue.

>Confirm by pressing OK.

The menu for setting the motorised antenna will now be displayed. (Fig. 9-4)

>Press the yellow function key Actions to open an additional window. (Fig. 9-5)

>Now use the up/down arrow keys to mark the line

Delete limits.

>Confirm by pressing OK to transfer the action selected to the green function key.

(Fig. 9-1)

(Fig. 9-2)

(Fig. 9-3)

(Fig. 9-4)

(Fig. 9-5)

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents DiSEqC DigiCorder S1Contents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitVideo Sehr geehrte Kundin, sehr geehrter Kunde Important notes on operating the unit Please read this firstDisposal information Safety notesTemporary disconnection HelpVCR Connecting the DVB receiver to a satellite InstallationSingle unit operation ConnectionsConnection to a television set Via Scart cableVia HF cable Video cassette recorder VCRHiFi Amplifier Analogue Digital Initial installationUnit with S-Video input Hosiden Serial Interface RSAntenna configuration Country settingDiSEqC Position A/Option aPosition B/Option B Updating softwareScanning for programmes When the scan is completed SettingsExiting from the installation assistant Operating languageRemote control code Basic settingsTime difference GMT hours CountryLanguage Audio signal Audio/Video settingsTV Scart mode Picture format TV setVideo system Dolby Digital AC3UHF output channel Antenna settings Switching DiSEqC on and offSetting the switching matrix Additional settings/LNC characteristics Switching on and off OperationRotary antenna Using the numeric keys Programme selection Using the programme up/down keysUsing the Navigator Programme list Selecting a listAccessing blocked programmes Information boxReception of encrypted programmes Special functions Multifeed optionsSelecting a starting time Volume control Dolby Digital AC3 modeSelecting another language Revert to last programme selected TV/Radio switchingDisplay time and programme information Additional programme informationUsing the internal video text decoder Teletext Using the teletext decoder of your television setTransponder information Freeze frameStop mode Mixed modeSub-titles Electronic Programme Guide SFI SiehFern InfoInterrupting download procedure Accessing electronic programme guideDownloading SFI data Now table with current programme contents NextMore Press the red function key Timer to open a selection window SFI timer programmingSFI functions SFI InfoSFI overview by programme type genre SFI programme overviewExiting from SFI Timer-controlled recordingHard drive operation RecordingOption Instant recording Start and end recording manuallyHard drive timer Timer recordingsVideo recorder timer Starting a recording manually and ending it auto MaticallyProgramme change timer Manual timer programmingSource DateChanging timer programming Timer overviewStop RepeatProgramming a new timer event Deleting timer programmingTimeshift function Press the green function key DeletePlay Playing hard drive recordingsTime Fast forward and Reverse Pause/Freeze frameEnding Play Managing the hard driveHard drive information Managing recordingsHard drive management DeleteSleep timer Configuring the Favourites listChanging basic programming Providers Calling up programme list managementPress the blue function key Functions Adding programmes to the Favourites listMarking blocks of programmes Use the left/right arrow keys to select Yes or NoSorting programmes Deleting from the Total listPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleSelecting a programme Programming the electronic programme guideSFI channel Start categoryChanging the unit PIN Parental controlFunction key ModeAutomatic scan Programme scanTransponder scan Satellite scanPress the red function key Start scan SatelliteScan mode Manual scanAfter the scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareSystem configuration Copying the settingsEncryption system Manual initialising of the CI moduleEastern and Western limits Operating a rotary antenna installation DiSEqCDeleting existing limits LNC testSet Eastern limit Setting Western limitGeo positioning Delete limNow press the arrow key left Setting a satellite positionFirst decimal point LatSetting user-defined satellite positions User satellite Test transponder/LNC configuration Adjusting the satellite antennaManual adjustment of antenna Automatic fine adjustment AutofocusCurrent satellite list Saving a satellite positionSelecting a satellite position Orbital position xx found. Save satellite ? FigTechnical Terms Delete satellite positionReference position Frequency range FrequencyCo-axial cable LNB/LNC Low Noise block converterService voltage Software updateReceiver see satellite receiver Satellite Satellite receiverDBS tuner Technical dataDemultiplexing Common Interface PLL modulator Antenna input Antenna outputOutput digital LNC power supplyVideo parameters Output TeletextRemote control system RC-5 TimerPower supply Mains adapter Power requirement Programme memory/satellite positionsProblem Possible cause Solution Troubleshooting guideNeously, and keep them Town/city Geogr. longitude E Geogr. latitude N Annexu Co-ordinates of some German cities1Town/city Geogr.longitude E Geogr. latitude N Co-ordinates of some German citiesAC3 IndexSFI Page For everyday operation Using the programme list34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents