TechniSat DigiCorder S1 manual Parental control, Changing the unit PIN

Page 49

>Press OK to select On.

>In the line Update time use the numeric keys to set the time at which the automatic download of SFI data is to be carried out.

>To start the download of updated SFI data manually, press the red function key Start now.

If you do not wish to reeceive the additional data, or if you cannot receive it because of your location, you can switch off the data receiving function:

>Switch the item SFI update to off, to disable the data reception. Only the programme information provided

by the programme providers themselves will now be available.

If the parameters of the data channel for downloading of the SFI data should be altered, you can correct them in this menu. The current transponder data can be obtained from specialist retailers.In the normal course of events you would not make any changes to this menu.

8.3 Parental control

Your unit is equipped with an access control function. This allows you to block key functions (e.g. calling up the main menu) from unauthorized access. In addition, programmes and recordings that you have blocked can only be accessed by means of a four-digit PIN code (unit PIN).

To configure the menu Parental control proceed as follows:

>Press Menu to display the Main Menu.

>Use the up/down arrow keys to mark the line

Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed.

>Use the up/down arrow keys to mark the line Parental control.

>Confirm by pressing OK.

The menu Parental control will be displayed. (Fig. 8-10)

>Use the up/down arrow keys to move the marker around within the menu, and change the individual positions. When selecting a menu item please note any additional messages displayed on screen.

8.3.1 Changing the unit PIN

The unit PIN code is set at the factory to 0000.

>Press OK to display the menu used to change the unit PIN code. (Fig. 8-11)

>Now use the numeric keys to enter the current unit PIN code (Default setting 0000).

>Using the numeric keys, enter the desired new unit PIN code.

(Fig. 8-10)

(Fig. 8-11)

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents DiSEqC DigiCorder S1Contents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitVideo Sehr geehrte Kundin, sehr geehrter Kunde Important notes on operating the unit Please read this firstDisposal information Safety notesTemporary disconnection HelpVCR Connecting the DVB receiver to a satellite InstallationSingle unit operation ConnectionsConnection to a television set Via Scart cableVideo cassette recorder VCR Via HF cableHiFi Amplifier Analogue Digital Initial installationUnit with S-Video input Hosiden Serial Interface RSAntenna configuration Country settingDiSEqC Position A/Option aUpdating software Position B/Option BScanning for programmes When the scan is completed SettingsExiting from the installation assistant Operating languageRemote control code Basic settingsTime difference GMT hours CountryLanguage Audio signal Audio/Video settingsTV Scart mode Picture format TV setDolby Digital AC3 Video systemUHF output channel Switching DiSEqC on and off Antenna settingsSetting the switching matrix Additional settings/LNC characteristics Operation Switching on and offRotary antenna Using the numeric keys Programme selection Using the programme up/down keysUsing the Navigator Programme list Selecting a listInformation box Accessing blocked programmesReception of encrypted programmes Multifeed options Special functionsSelecting a starting time Dolby Digital AC3 mode Volume controlSelecting another language Revert to last programme selected TV/Radio switchingDisplay time and programme information Additional programme informationUsing the internal video text decoder Teletext Using the teletext decoder of your television setTransponder information Freeze frameStop mode Mixed modeSub-titles Electronic Programme Guide SFI SiehFern InfoAccessing electronic programme guide Interrupting download procedureDownloading SFI data Next Now table with current programme contentsMore Press the red function key Timer to open a selection window SFI timer programmingSFI functions SFI InfoSFI overview by programme type genre SFI programme overviewExiting from SFI Timer-controlled recordingHard drive operation RecordingOption Instant recording Start and end recording manuallyHard drive timer Timer recordingsVideo recorder timer Starting a recording manually and ending it auto MaticallyProgramme change timer Manual timer programmingSource DateChanging timer programming Timer overviewStop RepeatProgramming a new timer event Deleting timer programmingTimeshift function Press the green function key DeletePlaying hard drive recordings PlayTime Fast forward and Reverse Pause/Freeze frameEnding Play Managing the hard driveHard drive information Managing recordingsHard drive management DeleteConfiguring the Favourites list Sleep timerChanging basic programming Providers Calling up programme list managementPress the blue function key Functions Adding programmes to the Favourites listMarking blocks of programmes Use the left/right arrow keys to select Yes or NoSorting programmes Deleting from the Total listPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleSelecting a programme Programming the electronic programme guideSFI channel Start categoryChanging the unit PIN Parental controlFunction key ModeAutomatic scan Programme scanTransponder scan Satellite scanPress the red function key Start scan SatelliteManual scan Scan modeAfter the scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareSystem configuration Copying the settingsEncryption system Manual initialising of the CI moduleEastern and Western limits Operating a rotary antenna installation DiSEqCDeleting existing limits LNC testSet Eastern limit Setting Western limitGeo positioning Delete limNow press the arrow key left Setting a satellite positionFirst decimal point LatSetting user-defined satellite positions User satellite Test transponder/LNC configuration Adjusting the satellite antennaManual adjustment of antenna Automatic fine adjustment AutofocusCurrent satellite list Saving a satellite positionSelecting a satellite position Orbital position xx found. Save satellite ? FigDelete satellite position Technical TermsReference position Frequency range FrequencyCo-axial cable LNB/LNC Low Noise block converterService voltage Software updateReceiver see satellite receiver Satellite Satellite receiverDBS tuner Technical dataDemultiplexing Common Interface PLL modulator Antenna input Antenna outputOutput digital LNC power supplyVideo parameters Output TeletextRemote control system RC-5 TimerPower supply Mains adapter Power requirement Programme memory/satellite positionsProblem Possible cause Solution Troubleshooting guideNeously, and keep them Town/city Geogr. longitude E Geogr. latitude N Annexu Co-ordinates of some German cities1Town/city Geogr.longitude E Geogr. latitude N Co-ordinates of some German citiesAC3 IndexSFI Page For everyday operation Using the programme list34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents