TechniSat DigiCorder S1 Starting a recording manually and ending it auto Matically

Page 36

Starting a recording manually and ending it auto-

matically

>Switch to the channel that will broadcast the program- me you wish to record.

>Press the Record key to record the current program- me. The programme will continue to be displayed on the screen while the recording is running.

>Press the On/Standby key

A prompt will appear on screen, asking you whether you wish to record the current programme to the end.

>Use the left/right arrow keys to select Yes in order to record the current programme to the end.

>Confirm by pressing OK.

The receiver will record the entire programme, and will then remain in standby mode.

>If you switch on the receiver before the end of the recording procedure, please note the messages displayed on screen.

7.15.1.2 Timer recordings

You can use the hard drive timer to make recordings on the integrated hard drive in your absence. In addition, your digital receiver is equipped with a video recorder timer and a pro- gramme change timer. As far as the programming is concer- ned, the timer types differ only in their names.

You may programme the timers manually as described in this chapter, or with the help of the SFI function as described in Point 7.14.7.2.

1. Hard drive timer

This function will switch the digital receiver on and off for the selected programme, so that this can be recorded on the hard drive in your absence.

If the receiver was switched on by means of the hard drive timer, this will be indicated by “ PVR Timer” being shown on the display. Most of the remote control functions are disabled in order to prevent an accidental premature interruption of the recording. When the receiver is in standby mode, an active timer will be indicated by a clock symbol shown on the display.

2. Video recorder timer

Use the video recorder timer to switch the digital receiver on and off for a particular programme, so that this can be recor- ded on an external recorder, such as a video recorder, in your absence. Please note that you must programme your video recorder to record the programme.

If the receiver was switched on by the video recorder timer, this will be indicated by “ VCR Timer” being shown on the display. Most of the remote control functions are disabled in

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents DigiCorder S1 DiSEqCContents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsVideo Sehr geehrte Kundin, sehr geehrter Kunde Please read this first Important notes on operating the unitSafety notes Disposal informationTemporary disconnection HelpConnecting the DVB receiver to a satellite Installation VCRConnections Single unit operationConnection to a television set Via Scart cableVia HF cable Video cassette recorder VCRHiFi Amplifier Analogue Initial installation DigitalUnit with S-Video input Hosiden Serial Interface RSCountry setting Antenna configurationDiSEqC Position A/Option aPosition B/Option B Updating softwareScanning for programmes Settings When the scan is completedExiting from the installation assistant Operating languageBasic settings Remote control codeTime difference GMT hours CountryAudio/Video settings Language Audio signalTV Scart mode Picture format TV setVideo system Dolby Digital AC3UHF output channel Antenna settings Switching DiSEqC on and offSetting the switching matrix Additional settings/LNC characteristics Switching on and off OperationRotary antenna Programme selection Using the programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listAccessing blocked programmes Information boxReception of encrypted programmes Special functions Multifeed optionsSelecting a starting time Volume control Dolby Digital AC3 modeSelecting another language TV/Radio switching Revert to last programme selectedDisplay time and programme information Additional programme informationTeletext Using the teletext decoder of your television set Using the internal video text decoderTransponder information Freeze frameMixed mode Stop modeSub-titles Electronic Programme Guide SFI SiehFern InfoInterrupting download procedure Accessing electronic programme guideDownloading SFI data Now table with current programme contents NextMore SFI timer programming Press the red function key Timer to open a selection windowSFI functions SFI InfoSFI programme overview SFI overview by programme type genreTimer-controlled recording Exiting from SFIHard drive operation RecordingInstant recording Start and end recording manually OptionTimer recordings Hard drive timerVideo recorder timer Starting a recording manually and ending it auto MaticallyManual timer programming Programme change timerSource DateTimer overview Changing timer programmingStop RepeatDeleting timer programming Programming a new timer eventTimeshift function Press the green function key DeletePlay Playing hard drive recordingsTime Pause/Freeze frame Fast forward and ReverseEnding Play Managing the hard driveManaging recordings Hard drive informationHard drive management DeleteSleep timer Configuring the Favourites listChanging basic programming Calling up programme list management ProvidersAdding programmes to the Favourites list Press the blue function key FunctionsMarking blocks of programmes Use the left/right arrow keys to select Yes or NoDeleting from the Total list Sorting programmesPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleProgramming the electronic programme guide Selecting a programmeStart category SFI channelParental control Changing the unit PINMode Function keyProgramme scan Automatic scanSatellite scan Transponder scanPress the red function key Start scan SatelliteScan mode Manual scanAfter the scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareCopying the settings System configurationEncryption system Manual initialising of the CI moduleOperating a rotary antenna installation DiSEqC Eastern and Western limitsDeleting existing limits LNC testSetting Western limit Set Eastern limitGeo positioning Delete limSetting a satellite position Now press the arrow key leftFirst decimal point LatSetting user-defined satellite positions User satellite Adjusting the satellite antenna Test transponder/LNC configurationManual adjustment of antenna Automatic fine adjustment AutofocusSaving a satellite position Current satellite listSelecting a satellite position Orbital position xx found. Save satellite ? FigTechnical Terms Delete satellite positionReference position Frequency Frequency rangeCo-axial cable LNB/LNC Low Noise block converterSoftware update Service voltageReceiver see satellite receiver Satellite Satellite receiverTechnical data DBS tunerDemultiplexing Common Interface PLL modulator Antenna input Antenna outputLNC power supply Output digitalVideo parameters Output TeletextTimer Remote control system RC-5Power supply Mains adapter Power requirement Programme memory/satellite positionsTroubleshooting guide Problem Possible cause SolutionNeously, and keep them Annexu Co-ordinates of some German cities1 Town/city Geogr. longitude E Geogr. latitude NCo-ordinates of some German cities Town/city Geogr.longitude E Geogr. latitude NIndex AC3SFI Page Using the programme list For everyday operation34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents