TechniSat DigiCorder S1 manual Pause/Freeze frame, Fast forward and Reverse, Ending Play

Page 41

7.15.2.2 Pause/Freeze frame

>To pause during the playback of a recording (freeze frame), press the yellow function key while the unit

is in Play mode. The message “Pause

▲II”will appear.

>Press the yellow function key again to continue play- ing the recording from the same position.

7.15.2.3 Fast forward and Reverse

To locate a specific point in a recording, your PVR is equip- ped with functions for fast forward and reverse play.

>While in Play mode, press the blue function key

Forward or the red function key Reverse.

 

The message will be displayed, either

 

“Spool forward ▲▲ ” or “Spool reverse▲▲

”. The

recording will now by played at 4x speed in the direc- tion indicated.

>If you press the red resp. blue function keys again, the speed will be increased to 16x. The following mes-

 

sages will be displayed, either “Spool forward ▲▲▲” or

 

“Spool reverse▲▲▲”.

>

If you press the red resp. blue function keys yet again,

 

the speed will be increased to 64x. The following mes-

 

sages will be displayed, either “Spool forward ▲▲▲▲”

 

or “Spool reverse ▲▲▲▲ ”.

>Pressing the red resp. blue function keys yet again will allow you to spool forward or back in 10 minute steps.

>Once you have found the desired place in the recor- ding, press the yellow function key to revert to nor- mal Play operation.

7.15.2.4 Ending Play

>If you wish to stop playing a recording, press the green function key. The playback function is termina- ted and your receiver reverts to normal operation.

7.15.3 Managing the hard drive

>Press the Menu key to display the Main Menu.

>Use the up/down arrow keys to mark the line Hard drive organizing.

>Confirm by pressing OK. The menu Hard drive organi- zing will be displayed. (Fig. 7-26)

>Use the up/down arrow keys to move the markers around within the menu, and to change the various positions.

(Fig. 7-26)

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DiSEqC DigiCorder S1Contents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitVideo Sehr geehrte Kundin, sehr geehrter Kunde Important notes on operating the unit Please read this firstDisposal information Safety notesTemporary disconnection HelpVCR Connecting the DVB receiver to a satellite InstallationSingle unit operation ConnectionsConnection to a television set Via Scart cableHiFi Amplifier Analogue Via HF cableVideo cassette recorder VCR Digital Initial installationUnit with S-Video input Hosiden Serial Interface RSAntenna configuration Country settingDiSEqC Position A/Option aScanning for programmes Position B/Option BUpdating software When the scan is completed SettingsExiting from the installation assistant Operating languageRemote control code Basic settingsTime difference GMT hours CountryLanguage Audio signal Audio/Video settingsTV Scart mode Picture format TV setUHF output channel Video systemDolby Digital AC3 Setting the switching matrix Antenna settingsSwitching DiSEqC on and off Additional settings/LNC characteristics Rotary antenna Switching on and offOperation Using the numeric keys Programme selection Using the programme up/down keysUsing the Navigator Programme list Selecting a listReception of encrypted programmes Accessing blocked programmesInformation box Selecting a starting time Special functionsMultifeed options Selecting another language Volume controlDolby Digital AC3 mode Revert to last programme selected TV/Radio switchingDisplay time and programme information Additional programme informationUsing the internal video text decoder Teletext Using the teletext decoder of your television setTransponder information Freeze frameStop mode Mixed modeSub-titles Electronic Programme Guide SFI SiehFern InfoDownloading SFI data Interrupting download procedureAccessing electronic programme guide More Now table with current programme contentsNext Press the red function key Timer to open a selection window SFI timer programmingSFI functions SFI InfoSFI overview by programme type genre SFI programme overviewExiting from SFI Timer-controlled recordingHard drive operation RecordingOption Instant recording Start and end recording manuallyHard drive timer Timer recordingsVideo recorder timer Starting a recording manually and ending it auto MaticallyProgramme change timer Manual timer programmingSource DateChanging timer programming Timer overviewStop RepeatProgramming a new timer event Deleting timer programmingTimeshift function Press the green function key DeleteTime PlayPlaying hard drive recordings Fast forward and Reverse Pause/Freeze frameEnding Play Managing the hard driveHard drive information Managing recordingsHard drive management DeleteChanging basic programming Sleep timerConfiguring the Favourites list Providers Calling up programme list managementPress the blue function key Functions Adding programmes to the Favourites listMarking blocks of programmes Use the left/right arrow keys to select Yes or NoSorting programmes Deleting from the Total listPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleSelecting a programme Programming the electronic programme guideSFI channel Start categoryChanging the unit PIN Parental controlFunction key ModeAutomatic scan Programme scanTransponder scan Satellite scanPress the red function key Start scan SatelliteAfter the scan Scan modeManual scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareSystem configuration Copying the settingsEncryption system Manual initialising of the CI moduleEastern and Western limits Operating a rotary antenna installation DiSEqCDeleting existing limits LNC testSet Eastern limit Setting Western limitGeo positioning Delete limNow press the arrow key left Setting a satellite positionFirst decimal point LatSetting user-defined satellite positions User satellite Test transponder/LNC configuration Adjusting the satellite antennaManual adjustment of antenna Automatic fine adjustment AutofocusCurrent satellite list Saving a satellite positionSelecting a satellite position Orbital position xx found. Save satellite ? FigReference position Technical TermsDelete satellite position Frequency range FrequencyCo-axial cable LNB/LNC Low Noise block converterService voltage Software updateReceiver see satellite receiver Satellite Satellite receiverDBS tuner Technical dataDemultiplexing Common Interface PLL modulator Antenna input Antenna outputOutput digital LNC power supplyVideo parameters Output TeletextRemote control system RC-5 TimerPower supply Mains adapter Power requirement Programme memory/satellite positionsProblem Possible cause Solution Troubleshooting guideNeously, and keep them Town/city Geogr. longitude E Geogr. latitude N Annexu Co-ordinates of some German cities1Town/city Geogr.longitude E Geogr. latitude N Co-ordinates of some German citiesAC3 IndexSFI Page For everyday operation Using the programme list34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents