TechniSat DigiCorder S1 manual Deleting timer programming, Programming a new timer event

Page 39

Deleting timer programming

>To delete an existing timer setting, use the up/down arrow keys to mark the setting.

>Press the green function key Delete.

A prompt will be displayed:”Do you really want to dele- te this timer?”

>Use the left/right arrow keys to select Yes.

>To delete the timer entry confirm by pressing OK.

Programming a new timer event

>To programme a new timer event, use the up/down arrow keys to mark a free line in the menu Timer overview.

>Press the yellow function key New to open a win- dow for the programming of the new timer event. Now enter the data as described in Point 7.15.1.2.

>Use the up/down arrow keys to mark the additional field Type.

>Confirm by pressing OK. A window will be displayed, showing the available timer types.

>Use the up/down arrow keys to select the desired timer type.

>To accept the timer type into memory, confirm by pres- sing OK.

>When you have completed the programming, press the yellow function key Accept to accept the data into memory.

Note!!!

Please ensure that the receiver has stored the current time in memory. This will by shown on the display when the unit is in standby mode. If this is not the case, switch your receiver on, and leave it tuned to a major channel such as ZDF that car- ries a time signal for approx. 30 seconds, so that the current time can be stored in memory.

If you have activated this function in terms of Point 6.2.4, the receiver should now show the current time on the display while in standby mode.

Timeshift function

The timeshift function provides the opportunity of simultane- ous recording and playback. This means that you can now enjoy timeshift television. Thus, you can view the beginning of a recording, and decide to skip certain parts, such as advertising. At the same time the recording of the live signal continues (see examples below)

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DiSEqC DigiCorder S1Contents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitVideo Sehr geehrte Kundin, sehr geehrter Kunde Important notes on operating the unit Please read this firstHelp Safety notesDisposal information Temporary disconnectionVCR Connecting the DVB receiver to a satellite InstallationVia Scart cable ConnectionsSingle unit operation Connection to a television setVia HF cable Video cassette recorder VCRHiFi Amplifier Analogue Serial Interface RS Initial installationDigital Unit with S-Video input HosidenPosition A/Option a Country settingAntenna configuration DiSEqCPosition B/Option B Updating softwareScanning for programmes Operating language SettingsWhen the scan is completed Exiting from the installation assistantCountry Basic settingsRemote control code Time difference GMT hoursPicture format TV set Audio/Video settingsLanguage Audio signal TV Scart modeVideo system Dolby Digital AC3UHF output channel Antenna settings Switching DiSEqC on and offSetting the switching matrix Additional settings/LNC characteristics Switching on and off OperationRotary antenna Selecting a list Programme selection Using the programme up/down keysUsing the numeric keys Using the Navigator Programme listAccessing blocked programmes Information boxReception of encrypted programmes Special functions Multifeed optionsSelecting a starting time Volume control Dolby Digital AC3 modeSelecting another language Additional programme information TV/Radio switchingRevert to last programme selected Display time and programme informationFreeze frame Teletext Using the teletext decoder of your television setUsing the internal video text decoder Transponder informationElectronic Programme Guide SFI SiehFern Info Mixed modeStop mode Sub-titlesInterrupting download procedure Accessing electronic programme guideDownloading SFI data Now table with current programme contents NextMore SFI Info SFI timer programmingPress the red function key Timer to open a selection window SFI functionsSFI overview by programme type genre SFI programme overviewRecording Timer-controlled recordingExiting from SFI Hard drive operationOption Instant recording Start and end recording manuallyStarting a recording manually and ending it auto Matically Timer recordingsHard drive timer Video recorder timerDate Manual timer programmingProgramme change timer SourceRepeat Timer overviewChanging timer programming StopPress the green function key Delete Deleting timer programmingProgramming a new timer event Timeshift functionPlay Playing hard drive recordingsTime Managing the hard drive Pause/Freeze frameFast forward and Reverse Ending PlayDelete Managing recordingsHard drive information Hard drive managementSleep timer Configuring the Favourites listChanging basic programming Providers Calling up programme list managementUse the left/right arrow keys to select Yes or No Adding programmes to the Favourites listPress the blue function key Functions Marking blocks of programmesNow pres the yellow function key Sort. a double Deleting from the Total listSorting programmes Press the blue function key Functions. a window willSelecting a programme Programming the electronic programme guideSFI channel Start categoryChanging the unit PIN Parental controlFunction key ModeAutomatic scan Programme scanSatellite Satellite scanTransponder scan Press the red function key Start scanScan mode Manual scanAfter the scan Unsorted Service settingsService settings SortedUpdating software Activate default settingActivate default setting Delete all programmesManual initialising of the CI module Copying the settingsSystem configuration Encryption systemLNC test Operating a rotary antenna installation DiSEqCEastern and Western limits Deleting existing limitsDelete lim Setting Western limitSet Eastern limit Geo positioningLat Setting a satellite positionNow press the arrow key left First decimal pointSetting user-defined satellite positions User satellite Automatic fine adjustment Autofocus Adjusting the satellite antennaTest transponder/LNC configuration Manual adjustment of antennaOrbital position xx found. Save satellite ? Fig Saving a satellite positionCurrent satellite list Selecting a satellite positionTechnical Terms Delete satellite positionReference position LNB/LNC Low Noise block converter FrequencyFrequency range Co-axial cableSatellite receiver Software updateService voltage Receiver see satellite receiver SatellitePLL modulator Antenna input Antenna output Technical dataDBS tuner Demultiplexing Common InterfaceTeletext LNC power supplyOutput digital Video parameters OutputProgramme memory/satellite positions TimerRemote control system RC-5 Power supply Mains adapter Power requirementProblem Possible cause Solution Troubleshooting guideNeously, and keep them Town/city Geogr. longitude E Geogr. latitude N Annexu Co-ordinates of some German cities1Town/city Geogr.longitude E Geogr. latitude N Co-ordinates of some German citiesAC3 IndexSFI Page For everyday operation Using the programme list34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents