TechniSat DigiCorder S1 manual For everyday operation, Using the programme list

Page 76

For everyday operation

Switching on and off

>Use the On/Standby key either on the unit or on the remote control to switch on the digital receiver.

>Press the key again to switch the unit off.

>The unit is now in standby mode, and the current time is shown on the display.

Programme selection

Using the programme up/down keys

>Use the programme up/down keys either on the unit or on the remote control to move up or down the list by one programme slot at a time.

Using the numeric keys

>Use the numeric keys to enter the required program-

 

me number.

 

 

For example

 

 

1

 

 

for programme slot 1

1,

then 4

 

for programme slot 14

2,

then 3,

then 4

for programme slot 234

When entering programme numnbers with more than one digit, you have approx. 3 seconds time after pressing a key to complete the entry.

If you wish to enter a number with only one or two digits, you can speed up the switching process by keeping your finger pressed down a little longer on the last digit.

Using the programme list:

>Press OK.

>You can now use the up/down arrow keys to mark the programme you wish to view.

>Press OK to select the marked programme.

>Use the up/down arrow keys to move up or down the list one line at a time.

>Use the left/right arrow keys to move back or forward in the list one page at a time.

Volume control

>You can adjust the volume of your digital receiver by means of the keys Volume + for louder and Volume - for softer volume.

>Press the key Sound on/off to switch the sound on or off (mute function).

76

Page 75 Page 77
Image 76
Page 75 Page 77
Contents DigiCorder S1 DiSEqCContents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsVideo Sehr geehrte Kundin, sehr geehrter Kunde Please read this first Important notes on operating the unitSafety notes Disposal informationTemporary disconnection HelpConnecting the DVB receiver to a satellite Installation VCRConnections Single unit operationConnection to a television set Via Scart cableVideo cassette recorder VCR Via HF cableHiFi Amplifier Analogue Initial installation DigitalUnit with S-Video input Hosiden Serial Interface RSCountry setting Antenna configurationDiSEqC Position A/Option aUpdating software Position B/Option BScanning for programmes Settings When the scan is completedExiting from the installation assistant Operating languageBasic settings Remote control codeTime difference GMT hours CountryAudio/Video settings Language Audio signalTV Scart mode Picture format TV setDolby Digital AC3 Video systemUHF output channel Switching DiSEqC on and off Antenna settingsSetting the switching matrix Additional settings/LNC characteristics Operation Switching on and offRotary antenna Programme selection Using the programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listInformation box Accessing blocked programmesReception of encrypted programmes Multifeed options Special functionsSelecting a starting time Dolby Digital AC3 mode Volume controlSelecting another language TV/Radio switching Revert to last programme selectedDisplay time and programme information Additional programme informationTeletext Using the teletext decoder of your television set Using the internal video text decoderTransponder information Freeze frameMixed mode Stop modeSub-titles Electronic Programme Guide SFI SiehFern InfoAccessing electronic programme guide Interrupting download procedureDownloading SFI data Next Now table with current programme contentsMore SFI timer programming Press the red function key Timer to open a selection windowSFI functions SFI InfoSFI programme overview SFI overview by programme type genreTimer-controlled recording Exiting from SFIHard drive operation RecordingInstant recording Start and end recording manually OptionTimer recordings Hard drive timerVideo recorder timer Starting a recording manually and ending it auto MaticallyManual timer programming Programme change timerSource DateTimer overview Changing timer programmingStop RepeatDeleting timer programming Programming a new timer eventTimeshift function Press the green function key DeletePlaying hard drive recordings PlayTime Pause/Freeze frame Fast forward and ReverseEnding Play Managing the hard driveManaging recordings Hard drive informationHard drive management DeleteConfiguring the Favourites list Sleep timerChanging basic programming Calling up programme list management ProvidersAdding programmes to the Favourites list Press the blue function key FunctionsMarking blocks of programmes Use the left/right arrow keys to select Yes or NoDeleting from the Total list Sorting programmesPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleProgramming the electronic programme guide Selecting a programmeStart category SFI channelParental control Changing the unit PINMode Function keyProgramme scan Automatic scanSatellite scan Transponder scanPress the red function key Start scan SatelliteManual scan Scan modeAfter the scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareCopying the settings System configurationEncryption system Manual initialising of the CI moduleOperating a rotary antenna installation DiSEqC Eastern and Western limitsDeleting existing limits LNC testSetting Western limit Set Eastern limitGeo positioning Delete limSetting a satellite position Now press the arrow key leftFirst decimal point LatSetting user-defined satellite positions User satellite Adjusting the satellite antenna Test transponder/LNC configurationManual adjustment of antenna Automatic fine adjustment AutofocusSaving a satellite position Current satellite listSelecting a satellite position Orbital position xx found. Save satellite ? FigDelete satellite position Technical TermsReference position Frequency Frequency rangeCo-axial cable LNB/LNC Low Noise block converterSoftware update Service voltageReceiver see satellite receiver Satellite Satellite receiverTechnical data DBS tunerDemultiplexing Common Interface PLL modulator Antenna input Antenna outputLNC power supply Output digitalVideo parameters Output TeletextTimer Remote control system RC-5Power supply Mains adapter Power requirement Programme memory/satellite positionsTroubleshooting guide Problem Possible cause SolutionNeously, and keep them Annexu Co-ordinates of some German cities1 Town/city Geogr. longitude E Geogr. latitude NCo-ordinates of some German cities Town/city Geogr.longitude E Geogr. latitude NIndex AC3SFI Page Using the programme list For everyday operation34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents