TechniSat DigiCorder S1 manual SFI functions, SFI Info, SFI timer programming

Page 32

or

>Press the numeric key “0” to go to the PVR navigator. Press Back to return to the table “Next”.

7.14.7 SFI functions

To utilise the following SFI functions, call up the SFI as des- cribed in Point 7.14.3.

7.14.7.1 SFI Info

The function SFI Info allows you to display a biref information on the programme or channel selected. Where SFI informa- tion is available, this will be indicated by the symbol next to the appropriate programme.

>Use the arrow keys or the function keys to mark the desired programme.

>Press SFI to display the information.

You can scroll or page through lengthy texts by means of the arrow keys.

>Press Back to revert to the previous table.

7.14.7.2 SFI timer programming

The electronic programme guide SFI can be utilised to facili- tate easy programming of timer events.

>Use the arrow or the function keys to mark the des- ired programme.

>Press the Record key to programme a Hard drive timer (see Point 7.15.1.2) for the selected programme.

or

>Press the red function key Timer to open a selection window.

>Use the up/down arrow keys to select the desired Timer type (see Point 7.15.1.2).

>Confirm by pressing OK.

For monitoring purposes, the menu Timer manage- ment will be displayed, showing the data related to the programme selected. Here you can enter any chan- ges, if required (see 7.15.1.2).

>Press Back to revert to the previous table.

The appropriate line has been marked. Depending on the timer type, your receiver will now be switched on at the starting time of the selected programme. If the unit has been switched on by the PVR timer, this will be indicated by

“ PVR Timer” shown in the display. Most of the remo- te control functions are disabled to prevent an acci- dental premature interruption of the recording.

When the unit is in standby mode, an active timer will be indicated by a clock symbol shown next to the time

on the display. Deleting an SFI timer event

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents DigiCorder S1 DiSEqCContents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsVideo Sehr geehrte Kundin, sehr geehrter Kunde Please read this first Important notes on operating the unitSafety notes Disposal informationTemporary disconnection HelpConnecting the DVB receiver to a satellite Installation VCRConnections Single unit operationConnection to a television set Via Scart cableHiFi Amplifier Analogue Via HF cableVideo cassette recorder VCR Initial installation DigitalUnit with S-Video input Hosiden Serial Interface RSCountry setting Antenna configurationDiSEqC Position A/Option aScanning for programmes Position B/Option BUpdating software Settings When the scan is completedExiting from the installation assistant Operating languageBasic settings Remote control codeTime difference GMT hours CountryAudio/Video settings Language Audio signalTV Scart mode Picture format TV setUHF output channel Video systemDolby Digital AC3 Setting the switching matrix Antenna settingsSwitching DiSEqC on and off Additional settings/LNC characteristics Rotary antenna Switching on and offOperation Programme selection Using the programme up/down keys Using the numeric keysUsing the Navigator Programme list Selecting a listReception of encrypted programmes Accessing blocked programmesInformation box Selecting a starting time Special functionsMultifeed options Selecting another language Volume controlDolby Digital AC3 mode TV/Radio switching Revert to last programme selectedDisplay time and programme information Additional programme informationTeletext Using the teletext decoder of your television set Using the internal video text decoderTransponder information Freeze frameMixed mode Stop modeSub-titles Electronic Programme Guide SFI SiehFern InfoDownloading SFI data Interrupting download procedureAccessing electronic programme guide More Now table with current programme contentsNext SFI timer programming Press the red function key Timer to open a selection windowSFI functions SFI InfoSFI programme overview SFI overview by programme type genreTimer-controlled recording Exiting from SFIHard drive operation RecordingInstant recording Start and end recording manually OptionTimer recordings Hard drive timerVideo recorder timer Starting a recording manually and ending it auto MaticallyManual timer programming Programme change timerSource DateTimer overview Changing timer programmingStop RepeatDeleting timer programming Programming a new timer eventTimeshift function Press the green function key DeleteTime PlayPlaying hard drive recordings Pause/Freeze frame Fast forward and ReverseEnding Play Managing the hard driveManaging recordings Hard drive informationHard drive management DeleteChanging basic programming Sleep timerConfiguring the Favourites list Calling up programme list management ProvidersAdding programmes to the Favourites list Press the blue function key FunctionsMarking blocks of programmes Use the left/right arrow keys to select Yes or NoDeleting from the Total list Sorting programmesPress the blue function key Functions. a window will Now pres the yellow function key Sort. a doubleProgramming the electronic programme guide Selecting a programmeStart category SFI channelParental control Changing the unit PINMode Function keyProgramme scan Automatic scanSatellite scan Transponder scanPress the red function key Start scan SatelliteAfter the scan Scan modeManual scan Service settings Service settingsSorted UnsortedActivate default setting Activate default settingDelete all programmes Updating softwareCopying the settings System configurationEncryption system Manual initialising of the CI moduleOperating a rotary antenna installation DiSEqC Eastern and Western limitsDeleting existing limits LNC testSetting Western limit Set Eastern limitGeo positioning Delete limSetting a satellite position Now press the arrow key leftFirst decimal point LatSetting user-defined satellite positions User satellite Adjusting the satellite antenna Test transponder/LNC configurationManual adjustment of antenna Automatic fine adjustment AutofocusSaving a satellite position Current satellite listSelecting a satellite position Orbital position xx found. Save satellite ? FigReference position Technical TermsDelete satellite position Frequency Frequency rangeCo-axial cable LNB/LNC Low Noise block converterSoftware update Service voltageReceiver see satellite receiver Satellite Satellite receiverTechnical data DBS tunerDemultiplexing Common Interface PLL modulator Antenna input Antenna outputLNC power supply Output digitalVideo parameters Output TeletextTimer Remote control system RC-5Power supply Mains adapter Power requirement Programme memory/satellite positionsTroubleshooting guide Problem Possible cause SolutionNeously, and keep them Annexu Co-ordinates of some German cities1 Town/city Geogr. longitude E Geogr. latitude NCo-ordinates of some German cities Town/city Geogr.longitude E Geogr. latitude NIndex AC3SFI Page Using the programme list For everyday operation34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents