TechniSat DigiCorder S1 manual Saving a satellite position, Current satellite list

Page 62

(Fig. 9-13)

(Fig. 9-14)

(Fig. 9-15)

(Fig. 9-16)

(Fig. 9-17)

focus procedure.

While the automatic adjustment is in progress, the message Autofocus will be displayed. (Fig. 9-13)

9.3.3 Saving a satellite position

NWhen the Autofocus function has been completed, you can proceed to save the satellite position in memory.

>Use the arrow keys to mark the field Save.

>Press OK.

Now the test transponder selected will check whether a signal is being received at this position. At the same time, the system will check whether the position to be saved is one that is already included in the pre-pro- gramming. (Fig. 9-14)

If this is the case, the message will be displayed:

Orbital position xx found. Save satellite ? (Fig. 9-15)

>To save the satellite position in memory, use the left/right arrow keys to mark the field Yes, and confirm by pressing OK.

If the check carried out by the test transponder does not recognise a position as being included in the pre- programming, or if the signal is too weak, an appropri- ate message will be displayed on screen.

(Figs. 9-16 and 9-17)

>To save the satellite position in memory, use the left/right arrow keys to mark the field Yes, and confirm by pressing OK.

9.4 Current satellite list

The satellite positions that have been saved in memory can be found in the satellite list. Positions that have not yet been saved are indicated in the list by an “*”.

>To turn the antenna dish to a position in the satellite list, use the arrow keys to mark the field Current satellite list.

>Confirm by pressing OK.

>Use the up/down arrow keys to select the desired position.

>Confirm by pressing OK.

The dish will now be turned to the selected position. While the positioning procedure is in progress, the blinking message “turn” will be displayed in the menu.

9.4.1 Selecting a satellite position

In order to turn the dish antenna to the position specified in the satellite list, your digital receiveris equipped with the fun- ction turn to Sat.

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents DigiCorder S1 DiSEqCContents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsVideo Sehr geehrte Kundin, sehr geehrter Kunde Please read this first Important notes on operating the unitTemporary disconnection Safety notesDisposal information HelpConnecting the DVB receiver to a satellite Installation VCRConnection to a television set ConnectionsSingle unit operation Via Scart cableHiFi Amplifier Analogue Via HF cableVideo cassette recorder VCR Unit with S-Video input Hosiden Initial installationDigital Serial Interface RSDiSEqC Country settingAntenna configuration Position A/Option aScanning for programmes Position B/Option BUpdating software Exiting from the installation assistant SettingsWhen the scan is completed Operating languageTime difference GMT hours Basic settingsRemote control code CountryTV Scart mode Audio/Video settingsLanguage Audio signal Picture format TV setUHF output channel Video systemDolby Digital AC3 Setting the switching matrix Antenna settingsSwitching DiSEqC on and off Additional settings/LNC characteristics Rotary antenna Switching on and offOperation Using the Navigator Programme list Programme selection Using the programme up/down keysUsing the numeric keys Selecting a listReception of encrypted programmes Accessing blocked programmesInformation box Selecting a starting time Special functionsMultifeed options Selecting another language Volume controlDolby Digital AC3 mode Display time and programme information TV/Radio switchingRevert to last programme selected Additional programme informationTransponder information Teletext Using the teletext decoder of your television setUsing the internal video text decoder Freeze frameSub-titles Mixed modeStop mode Electronic Programme Guide SFI SiehFern InfoDownloading SFI data Interrupting download procedureAccessing electronic programme guide More Now table with current programme contentsNext SFI functions SFI timer programmingPress the red function key Timer to open a selection window SFI InfoSFI programme overview SFI overview by programme type genreHard drive operation Timer-controlled recordingExiting from SFI RecordingInstant recording Start and end recording manually OptionVideo recorder timer Timer recordingsHard drive timer Starting a recording manually and ending it auto MaticallySource Manual timer programmingProgramme change timer DateStop Timer overviewChanging timer programming RepeatTimeshift function Deleting timer programmingProgramming a new timer event Press the green function key DeleteTime PlayPlaying hard drive recordings Ending Play Pause/Freeze frameFast forward and Reverse Managing the hard driveHard drive management Managing recordingsHard drive information DeleteChanging basic programming Sleep timerConfiguring the Favourites list Calling up programme list management ProvidersMarking blocks of programmes Adding programmes to the Favourites listPress the blue function key Functions Use the left/right arrow keys to select Yes or NoPress the blue function key Functions. a window will Deleting from the Total listSorting programmes Now pres the yellow function key Sort. a doubleProgramming the electronic programme guide Selecting a programmeStart category SFI channelParental control Changing the unit PINMode Function keyProgramme scan Automatic scanPress the red function key Start scan Satellite scanTransponder scan SatelliteAfter the scan Scan modeManual scan Sorted Service settingsService settings UnsortedDelete all programmes Activate default settingActivate default setting Updating softwareEncryption system Copying the settingsSystem configuration Manual initialising of the CI moduleDeleting existing limits Operating a rotary antenna installation DiSEqCEastern and Western limits LNC testGeo positioning Setting Western limitSet Eastern limit Delete limFirst decimal point Setting a satellite positionNow press the arrow key left LatSetting user-defined satellite positions User satellite Manual adjustment of antenna Adjusting the satellite antennaTest transponder/LNC configuration Automatic fine adjustment AutofocusSelecting a satellite position Saving a satellite positionCurrent satellite list Orbital position xx found. Save satellite ? FigReference position Technical TermsDelete satellite position Co-axial cable FrequencyFrequency range LNB/LNC Low Noise block converterReceiver see satellite receiver Satellite Software updateService voltage Satellite receiverDemultiplexing Common Interface Technical dataDBS tuner PLL modulator Antenna input Antenna outputVideo parameters Output LNC power supplyOutput digital TeletextPower supply Mains adapter Power requirement TimerRemote control system RC-5 Programme memory/satellite positionsTroubleshooting guide Problem Possible cause SolutionNeously, and keep them Annexu Co-ordinates of some German cities1 Town/city Geogr. longitude E Geogr. latitude NCo-ordinates of some German cities Town/city Geogr.longitude E Geogr. latitude NIndex AC3SFI Page Using the programme list For everyday operation34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents