TechniSat DigiCorder S1 manual Neously, and keep them

Page 70

Problem

Possible cause

 

Solution

 

 

 

Current time not displayed while in

Current time not downloaded

Switch to major programme, e.g.

standby mode

 

ZDF, for approx. 30 seconds.

 

 

 

Unit cannot be switched on, or can-

Unit blocked

Perform flash reset: Note! All perso-

not be operated

 

nal settings are lost in this process.

 

 

>

Disconnect mains power plug.

 

 

>

Press Standby and Programme

 

 

 

Up keys on unit simulta-

 

 

 

neously, and keep them

 

 

 

pressed down.

 

 

>

While Programme Up and

 

 

 

Standby keys are still pressed,

 

 

 

reconnect mains power plug.

 

 

>

Keep keys pressed down for

 

 

 

approx. 5 secs. until Display

 

 

 

“FLAS” appears

 

 

 

 

Recording on hard drive no longer

Hard drive is full

Delete existing recording(s)

possible

 

 

 

 

 

 

Deleting hard drive recordings not

File system of hard drive is dama-

Check hard drive (Point 7.15.3.3)

possible

ged

 

 

 

 

 

 

70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents DigiCorder S1 DiSEqCContents Changing basic programming Operating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsVideo Sehr geehrte Kundin, sehr geehrter Kunde Please read this first Important notes on operating the unitTemporary disconnection Safety notesDisposal information HelpConnecting the DVB receiver to a satellite Installation VCRConnection to a television set ConnectionsSingle unit operation Via Scart cableVideo cassette recorder VCR Via HF cableHiFi Amplifier Analogue Unit with S-Video input Hosiden Initial installationDigital Serial Interface RSDiSEqC Country settingAntenna configuration Position A/Option aUpdating software Position B/Option BScanning for programmes Exiting from the installation assistant SettingsWhen the scan is completed Operating languageTime difference GMT hours Basic settingsRemote control code CountryTV Scart mode Audio/Video settingsLanguage Audio signal Picture format TV setDolby Digital AC3 Video systemUHF output channel Switching DiSEqC on and off Antenna settingsSetting the switching matrix Additional settings/LNC characteristics Operation Switching on and offRotary antenna Using the Navigator Programme list Programme selection Using the programme up/down keysUsing the numeric keys Selecting a listInformation box Accessing blocked programmesReception of encrypted programmes Multifeed options Special functionsSelecting a starting time Dolby Digital AC3 mode Volume controlSelecting another language Display time and programme information TV/Radio switchingRevert to last programme selected Additional programme informationTransponder information Teletext Using the teletext decoder of your television setUsing the internal video text decoder Freeze frameSub-titles Mixed modeStop mode Electronic Programme Guide SFI SiehFern InfoAccessing electronic programme guide Interrupting download procedureDownloading SFI data Next Now table with current programme contentsMore SFI functions SFI timer programmingPress the red function key Timer to open a selection window SFI InfoSFI programme overview SFI overview by programme type genreHard drive operation Timer-controlled recordingExiting from SFI RecordingInstant recording Start and end recording manually OptionVideo recorder timer Timer recordingsHard drive timer Starting a recording manually and ending it auto MaticallySource Manual timer programmingProgramme change timer DateStop Timer overviewChanging timer programming RepeatTimeshift function Deleting timer programmingProgramming a new timer event Press the green function key DeletePlaying hard drive recordings PlayTime Ending Play Pause/Freeze frameFast forward and Reverse Managing the hard driveHard drive management Managing recordingsHard drive information DeleteConfiguring the Favourites list Sleep timerChanging basic programming Calling up programme list management ProvidersMarking blocks of programmes Adding programmes to the Favourites listPress the blue function key Functions Use the left/right arrow keys to select Yes or NoPress the blue function key Functions. a window will Deleting from the Total listSorting programmes Now pres the yellow function key Sort. a doubleProgramming the electronic programme guide Selecting a programmeStart category SFI channelParental control Changing the unit PINMode Function keyProgramme scan Automatic scanPress the red function key Start scan Satellite scanTransponder scan SatelliteManual scan Scan modeAfter the scan Sorted Service settingsService settings UnsortedDelete all programmes Activate default settingActivate default setting Updating softwareEncryption system Copying the settingsSystem configuration Manual initialising of the CI moduleDeleting existing limits Operating a rotary antenna installation DiSEqCEastern and Western limits LNC testGeo positioning Setting Western limitSet Eastern limit Delete limFirst decimal point Setting a satellite positionNow press the arrow key left LatSetting user-defined satellite positions User satellite Manual adjustment of antenna Adjusting the satellite antennaTest transponder/LNC configuration Automatic fine adjustment AutofocusSelecting a satellite position Saving a satellite positionCurrent satellite list Orbital position xx found. Save satellite ? FigDelete satellite position Technical TermsReference position Co-axial cable FrequencyFrequency range LNB/LNC Low Noise block converterReceiver see satellite receiver Satellite Software updateService voltage Satellite receiverDemultiplexing Common Interface Technical dataDBS tuner PLL modulator Antenna input Antenna outputVideo parameters Output LNC power supplyOutput digital TeletextPower supply Mains adapter Power requirement TimerRemote control system RC-5 Programme memory/satellite positionsTroubleshooting guide Problem Possible cause SolutionNeously, and keep them Annexu Co-ordinates of some German cities1 Town/city Geogr. longitude E Geogr. latitude NCo-ordinates of some German cities Town/city Geogr.longitude E Geogr. latitude NIndex AC3SFI Page Using the programme list For everyday operation34203

DigiCorder S1 specifications

The TechniSat DigiCorder S1 is a versatile and feature-rich digital video recorder (DVR) designed for users seeking high-quality television viewing experiences. Launched as a part of TechniSat’s array of premium electronic devices, the DigiCorder S1 stands out due to its array of technological advancements and user-friendly features.

One of the key features of the DigiCorder S1 is its ability to record television programs in high definition, ensuring that users can enjoy crystal-clear visuals. With a built-in hard drive that typically ranges from 160 GB to 320 GB, it offers ample storage space for users to save their favorite shows and movies. The unit employs advanced compression technologies that maximize recording capacity while maintaining image quality.

The device supports various broadcasting standards, including both DVB-S2 for satellite and DVB-T/DVB-T2 for terrestrial signals. This versatility enables users to select the best source available for high-quality content. The twin-tuner feature allows users to record one program while watching another, enhancing multifunctional capability and improving overall user satisfaction.

Connectivity options on the DigiCorder S1 are extensive, including HDMI for high-quality video output, USB ports for connection to external storage devices, and Ethernet for internet and network connectivity. This allows users to access various streaming services and online content, further expanding the entertainment possibilities.

The user interface is designed to be intuitive, making it easy to navigate through menus and set up recordings. The electronic program guide (EPG) simplifies the process of finding programs, while a timer-recording function ensures users never miss their favorite shows. Advanced features such as series recording and one-touch recording add convenience to the viewing experience.

Additionally, the TechniSat DigiCorder S1 is equipped with versatile playback features. Users can pause, rewind, and fast-forward through live television or recorded content, providing a customized viewing experience.

In conclusion, the TechniSat DigiCorder S1 is not just a digital video recorder but a comprehensive entertainment hub equipped with advanced features, making it a valuable addition to any home entertainment system. From high-definition recordings to seamless connectivity, the DigiCorder S1 delivers a complete solution for modern viewing habits. Whether watching live broadcasts or enjoying recorded content, this device ensures users have the best possible television experience.
Top Page Image Contents