Panasonic AJ-D230HP operating instructions Interface menu, Type Format SEL setting

Set-up Menus

OPERATION menu

	Item		Setting
No.	Superimposed	No.	S u p e r i m p o s e d
	d i s p l a y		d i s p l a y
108 FORMAT SEL 0000			DVCPRO
		0001	DV
		0002	DVCAM

Description of settings

This selects the format when an L cassette is used.

0:DVCPRO mode

1:DV mode

2:DVCAM mode

<Note>

The cassette tape is played back in one of the modes listed below depending on the tape type and settings used.

Type	FORMAT SEL setting
	DVCPRO	DV	DVCAM
S size cassette	DV	DV	DVCAM
M size cassette	DVCPRO	DVCPRO	DVCPRO
L size cassette	DVCPRO	DV	DVCAM

Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM tapes are to be used in the playback mode, it is recommended that playback be limited to as short a period of time as possible.

109 REC INHIBIT	0000	OFF	This selects whether to inhibit recording on the VTR.
	0001	ON	0: Recording is not inhibited.
			1: Recording is inhibited.

The underlined number and item are the factory settings.

INTERFACE menu

Item

No.	S u p e r i m p o s e d	No.
	display
200	BAUD RATE	0000
		0001
		0002
		0003
		0004

201DATA LENGTH 0000 0001

202	STOP BIT	0000
		0001
203	PARITY	0000
		0001
		0002

204 ACK RETURN 0000

0001

Setting	Description of settings
S u p e r i m p o s e d
d i s p l a y
1200 This sets the RS-232C transfer rate (baud rate).
2400
4800
9600
19200
8BIT	This sets the RS-232C data length.
7BIT
1BIT	This sets the RS-232C stop bit length.
2BIT
NONE	This sets whether the RS-232C parity bit is to be used
ODD	and, if so, whether with even or odd parity.
EVEN	0: The parity bit is not used.
	1: The parity bit is used with odd parity.
	2: The parity bit is used with even parity.
OFF	This sets the RS-232C return data.
ON	0: The ACK code is not returned.

1: The ACK code is returned.

The underlined number and item are the factory settings.

<Note>

After the settings of items No.200 through No.203 have been changed, the new settings will not take effect until the power is switched on. This means that the power must be turned off and back on again after these settings are changed.

26