Panasonic AJ-D230HP operating instructions Operation menu, Description of settings

AUTO

WIDE NORMAL

STOP

REW PAUSE PLAY

12H

24H

Set-up Menus

OPERATION menu

Item

No.	S u p e r i m p o s e d	No.
	d i s p l a y
1 0 0	LOCAL	0000
	ENABLE	0001
1 0 1	TAPE TIMER	0000
		0001
1 0 2	S/F/R EE SEL 0000
		0001

103 WIDE MODE 0000

0001

0002

104TAPE IN MODE 0000 0001 0002 0003

105	TAPE END	0000
	MODE	0001
		0002
		0003
106	SERVO REF	0000
		0001

Setting	Description of settings
S u p e r i m p o s e d
d i s p l a y	This selects the switches on the front panel which can
DISABLE
ST EJ	be operated in the remote control mode.
	0: None of the switches can be operated.
	1: Only the STOP and EJECT switches can be operated.

This selects the CTL counter display. 0: ±12-hour display

1:24-hour display

EE This selects the EE/VV output during stop, fast TAPE forwarding or rewinding.

0:EE is output.

1:VV is output.

This selects the WIDE mode. 0: Automatic detection.

1: The screen mode is forcibly treated as WIDE.

2: The screen mode is forcibly treated as NORMAL.

This selects the operation which follows when the cassette is inserted.

0: STOP

1: Rewind

2:Play pause

3:Play

STOP	This selects the operation which follows when the tape
REW	has reached the end.
R E W E J	0: Stop
EJECT	1: Rewind
	2: This rewinds the tape and ejects it upon completion
	of rewinding.
AUTO	3: Eject
	This selects the sync signals of the servo.
EXT	0: Synchronization with the input signals; if no input
	signals are present, synchronization with the internal
	signals.
	1: During playback, synchronization with the SYNC IN
	signals; if these	signals	are not present,
	synchronization with	the internal	signals.

(AUTO) VIDEO IN connector:

Synchronized playback is performed using standard video signals.

With non-standard video signals, the switching is performed in such a way that playback is synchronized with the internal signals.

(EXT) SYNC IN connector:

Use standard signals as the SYNC signals.

Non-standard signals cannot be used. Use of the BB (black burst) signal is recommended. When an out-of-sync state occurs due to SYNC signal switching or interruption

Set to the STOP EE mode or eject the cassette and then re-load it.
This makes it possible for the synchronization to be reset.
107 AUTO BACK	0000	OFF	This selects whether	to automatically reverse (auto
	0001	ON	back) the tape to	achieve back-space assemble

recording.

0:No auto back

1:Auto back

The underlined number and item are the factory settings.

25