JVC HR-J7005UM manual Activate HIGH-SPEED Search, Skip Over Unwanted Sections, Start Search

FF

LAY

REW

4 5 6

7 8 9

0 4

EN15

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. By releasing SHUTTLE still picture playback is selected.

●For forward high-speed search, turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse high-speed search, turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still, press FF for forward high- speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

LAY 1

REW

3

SHUTTLE

SKIP SEARCH

FF

NOTE:

For short searches, during playback or still, press and hold FF or REW for over 2 seconds. When released, normal playback resumes.

Skip Search

SKIP OVER UNWANTED SECTIONS

1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a 30-second period of fast- motion playback. Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

Variable-Speed Search/ Reverse Motion Playback

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 14).

OR

During playback, repeatedly press and release ª or

£to select the search speed.

●To increase the speed in the forward direction, press and release £ repeatedly to select the various forward search modes.

●To decrease the speed in the forward direction, press and release ª.

●To play in reverse slow motion, and in reverse play mode, continue to press ªrepeatedly after selecting all the forward slow motion modes.

To resume normal playback, press PLAY.

Index Search

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

START SEARCH

1 While the tape is stopped, press ª or £ (Þor %).

ACCESS DISTANT CODE

2 To access a recording 2–9 index codes away, press ªor £ ( Þor %) repeatedly until the correct number is displayed on screen (only if SUPERIMPOSE is set to ON (☞ pg. 19). Playback begins automatically when the desired recording is located.

●If necessary press REW or FF when play starts to search visually to find the very beginning of the desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.