JVC HR-J7005UM manual Recording Features, Engage TV Mode, Select Channel for Viewing

24EN

PLAYBACKANDRECORDINGFEATURES(cont.)

Recording Features

OSD

TV/VCR

1 2 3

2

4 5 6

7 8 9

Record One Program While Watching Another

1	ENGAGE TV MODE
	During recording...
	● Press TV/VCR. The VCR's VCR indicator goes out. (If
	you are using the RF connection (☞ pg. 4) to view
	the output from your VCR, the TV broadcast being
	recorded disappears.)
	● If you are using the AV connection (☞ pg. 4) to view
	the output from your VCR, change the TV's input
	mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

C.RESET

0 4

Display Elapsed Recording

1 Time

1

2

RESET COUNTER TO ZERO

Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

DISPLAY ELAPSED TIME ON SCREEN

During recording, press OSD at any time to see the elapsed time.

All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.

●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 19).

●The indications are not recorded.