JVC HR-J7005UM manual Edit From a Camcorder, SET RECORDER’S Input

36EN

EDITING(cont.)

Edit From A Camcorder

Recorder Your VCR

To rear panel PAUSE/AV

COMPULINK connector

	AUDIO	Mini-plug cable (not supplied)
		(JVC camcorder only)
VIDEO IN	IN

Audio/Video cable (not supplied)

	VIDEO OUT
Camcorder	AUDIO OUT
	EDIT
Player

MENU

CH

You can use a camcorder as the player and your VCR as the recorder.

1		MAKE CONNECTIONS
	Connect an AV cable between the camcorder’s VIDEO
		OUT and AUDIO OUT connectors and your VCR’s
		VIDEO IN and AUDIO IN connectors.
		● When a Master Edit Control-equipped JVC camcorder is
		used, the camcorder is capable of controlling your VCR.
		The mini-plug cable is a mono 3.5 mm mini-plug to
		mono 3.5 mm mini-plug connector.
		● If connecting to a camcorder with a monaural output,
		connect the audio output connector on the
		camcorder to AUDIO IN L of the VCR.
2		LOAD A CASSETTE
	Insert the cassette to be recorded on into the recorder.
		SET RECORDER’S INPUT
3		MODE
	Set to "AUX". Press the NUMBER key “0” and/or CH to
	select depending on the connector being used – "L-1"
	for the rear AUDIO/VIDEO IN connectors, or "F-1" for
	the front AUDIO/VIDEO connectors.
	If you’re using a JVC Master Edit Control-equipped
		camcorder — step 4
		If not — step 8
		ACCESS MAIN MENU
4		SCREEN
	Press MENU.
		ACCESS FUNCTION SET
5		SCREEN
	Press CH 5°or %Þto move the highlight bar (arrow) to
		“FUNCTION SET”, then press OK or%.

OK

7 8 9

NUMBER "0"

0 4

1

3 OK

MENU