Multimedia

Installing Applications from a Disc

Most of the applications on discs included with your notebook can be installed by using the following procedure.

To install multimedia software from a disc:

1.Connect the notebook to reliable external power.

2.Make sure that your notebook is on and in Windows.

3.Close any open applications.

4.Insert the disc into the optical drive. After several seconds, an installation wizard is displayed.

If the installation wizard does not display, your AutoPlay settings may have been modified. To proceed with the installation:

a.Select Start > Run.

b.In the Open text field, type

x:\setup.exe

where x is the drive designation of the drive containing the disc.

c.Select OK.

5.When the installation wizard is displayed, follow the instructions on the screen.

For more information about AutoPlay settings, refer to “Setting AutoPlay Preferences,” later in this chapter.

Hardware and Software Guide

4–13

Page 88
Image 88
HP R4025US, R4000, R4001XX, R4003XX, R4012US, R4127US, R4010US manual Installing Applications from a Disc, Select Start Run