Security
Setting DriveLock Passwords
To set a DriveLock password:
1.If you are not sure whether the notebook is off or in hibernation, press the power button. (The notebook turns on or restores from hibernation.)
2.Display the Setup message.
❏If the notebook is on, restart the notebook through the operating system.
❏If you are certain that the notebook is off and not in hibernation, turn the notebook on.
3.Press f10 while the Setup message is displayed in the
4.Use the arrow keys to select Security > DriveLock Password, and then press enter.
5.Read the warning, and then press enter.
6.Type the new password in the Enter New Password field, and then press enter.
7.Type the new password in the Confirm New Password field, and then press enter.
8.To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, and then press f10.
9.Press enter to continue.
10.To save your preferences and exit the Setup utility, press f10, and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide |
