Security
Changing DriveLock Passwords
To change a DriveLock password:
1.If the notebook is on, shut down the notebook.
If the notebook is not on and you are not sure whether the notebook is off or in hibernation, press the power button. When the notebook has turned on or restored from hibernation, shut down the notebook through the operating system.
2.Turn on the notebook.
3.Press f10 while the Setup message is displayed in the
4.Use the arrow keys to select Security > DriveLock Password, and then press enter.
5.Type the current password in the Enter Current Password field, and then press enter.
6.Type the new password in the Enter New Password field, and then press enter.
7.Type the new password in the Confirm New Password field, and then press enter.
8.When the Setup Notice is displayed, press enter to save your changes.
9.To save your preferences and exit the Setup utility, press f10, and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide |
