Software Updates and Recovery

Repairing the Operating System

To repair the operating system without deleting your personal data:

1.Be sure the notebook is connected to a AC outlet through the AC adapter.

2.Insert the Operating System disc (included with the notebook) into the optical drive.

3.Shut down the notebook using the standard shutdown procedure for your operating system:

In Windows XP Home, press ctrl+alt+del, and then select

Shut Down > Turn Off.

In Windows XP Professional, press ctrl+alt+del. Select Shut down from the drop-down list, and then select OK.

If you are unable to shut down the notebook using the ctrl+alt+del keys, press and hold the power button for 4 seconds.

4.Turn on the notebook by briefly pressing the power button.

5.When prompted, press any key to boot from disc. (After a few minutes, the setup wizard opens and the “Welcome to Setup” page is displayed).

On the “Welcome to Setup” page do not press R (step 8 in this procedure) until you have completed steps 6 and 7.

6.Press enter to continue. (The “Licensing Agreement” page is displayed).

7.Press f8 to accept the agreement and continue. (The “Setup” page is displayed).

8.Press R to repair the selected Windows installation. (The repair process begins).

After the repair process is complete, which may take up to several hours, the notebook restarts in Windows.

14–14

Hardware and Software Guide

Page 192
Image 192
HP R4012US, R4000, R4001XX, R4003XX, R4025US, R4127US, R4010US manual Repairing the Operating System, Shut Down Turn Off