UMBER | 1 | 2 | 3 |
|
"8" |
|
|
| 2 |
4 | 5 | 6 |
| |
|
| |||
| 7 | 8 | 9 | NUMBER "9" |
|
|
0 | TIMER | |
4 | ||
| ||
| CH |
PROG. 1
| SP/EP |
3 | OK |
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
|
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
|
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
| CH40 |
|
|
|
Not recorded
EN31
7 |
| SET CHANNEL NUMBER |
Press CH | ||
|
| |
| ● Holding down CH +/– rapidly scans through the | |
| channels. | |
| ● If you are using a cable box, enter the cable box | |
|
| channel, not the channel to be recorded. The channel |
|
| to be recorded must be selected on the cable box. |
|
| (The cable box channel is the VCR's channel that |
|
| displays the channels received by the cable box.) |
| ● To | |
|
| external tuner connected to the VCR's rear or front |
|
| external input connectors, press the NUMBER key "0" |
|
| and/or CH so that |
|
| channel number. |
|
|
|
8 |
| SET TAPE SPEED |
Press SP/EP to set the tape speed. | ||
|
| RETURN TO NORMAL |
9 |
| SCREEN |
Press PROG. or OK. "PROGRAM COMPLETED" | ||
| appears on the screen for about 5 seconds, then normal | |
| screen appears. | |
10 |
| ENGAGE TIMER MODE |
Press TIMER. The VCR turns off automatically and "ä" | ||
| is displayed on the display panel. |
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections (if the lithium battery is not exhausted).
●Programs that start after midnight must have the next day’s date.
●After timer recording is completed, the VCR’s power goes off automatically.
●You can program the timer while a regular recording is in progress; the
●If the end of tape is reached during timer recording, the cassette is automatically ejected.
●When