JVC HR-J7005UM Start Repeat, Stop Repeat, Repeat Playback, Counter Reset, Next-Function Memory

18EN

PLAYBACKANDRECORDINGFEATURES(cont.)

Repeat Playback

POWER

PLAY FF

REW

STOP	PAUSE
POWER

1		START REPEAT
	Press and hold PLAY (until " " blinks on the front
		display panel) during playback, then release.
		● The entire tape is played back 50 times.

2	STOP REPEAT
	To stop, press STOP at any time.
	NOTE:
	Pressing PLAY, REW, FF, PAUSE or ªor £also
	stops Repeat Playback.

Counter Reset

DISPLAY

1	2	3
		2
4	5	6
7	8	9
	0	TIMER
C.RESET		4
		PLAY
1
		FF
REW
STOP		PAUSE
		3

	1		RESET COUNTER TO ZERO
		Press C.RESET.
			NOTE:
			By pressing the DISPLAY button, you can change the
			display to show the counter reading, channel number
			or clock time. (Channel number is not displayed during
			playback.)
Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF or REW,
or perform an Index Search. The
position of "	" in relation to "B"
(Beginning) or "E" (End) shows you		B	+	+	+		E
where you are on the tape.
				COUNT		0:33:27
NOTES:

●"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 19).

●It may take a few seconds for the Tape Position Indicator to be displayed.

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.