JVC SR-V10E 10 EN, Check the contents, Situate the recorder, Connect the recorder to TV

Page 10

10 EN

INSTALLING YOUR NEW RECORDER

Basic Connections

Aerial connector

Back of TV

RF cable (provided)

TV aerial

Audio/video input cable connectors

Audio/video cable (provided)

Mains power cord

ANT. IN

Back of recorder

AUDIO/VIDEO OUT RF OUT

Mains outlet

Make AV connection if your TV has audio/video input connectors in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

●For switching the TV’s mode, refer to the instruction manual of your television.

●To obtain high-quality S-VHS pictures, you can also use the S-VIDEO connection described on page 11.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 63.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8 To connect to a TV with NO audio/video input connectors . . .

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector

on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8 To connect to a TV with audio/video input connectors . . .

AConnect the aerial, recorder and TV as per “RF Connection”.

BConnect the provided audio/video cable between the AUDIO/VIDEO OUT connectors on the rear panel of the recorder and the TV’s audio/video input connectors.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 12.

Image 10

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewClose the battery cover until it clicks in place Rear ViewFront Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryWith RF connection Perform Auto Set UpConfirm/Set video channel With AV or S-VIDEO connectionJust Clock Results of Auto Set Up appear on the front display panel14 EN Last-Function MemoryBasic Playback High-Speed Turbo Search 16 ENSlow Motion Pause during playbackIndex Search Mode Lock To prohibit any operations during playbackVariable Speed Search Skip SearchRepeat Playback 18 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingWatching Another Mode Lock To prohibit any operations during recording20 EN Accidental erasure preventionTape Remaining Time Repeat RecordingSuper VHS ET S-VHS ET Engage the S-VHS ET mode22 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingSR-V10E-1 Series Playback24 EN SR-V10E-2Turn on all components Make connectionsLoad cassettes Start playback Series Recording 26 ENPress 7on either of SR-V10E Set the input mode on both SR-V10EPrepare for recording Start recording Press 0on the SR-V10E which is recordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Cancel or change a programmeDisengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Recording modeBefore performing the following steps Navigation 36 ENProgramme Navigation Screen Access the Main Menu screenNavigation Playback Load a recorded cassetteEdit Programme Title 38 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 40 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Connecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPicture reproduction is also linked to this function Using this video recorder as the source player for editingPowered back on We recommend that you set Digital TBC/NR to on whenScreen While timer-recording in SP mode46 EN Set PROG. Navigation to OFFSetting Correction to the luminance signal to enhance detailS-VHS recording mode is selected Panel. Then, set S-VHS to OFF. The S-VHS indicator goes off48 EN About Ntsc PlaybackGuide Program Number Set Showview System SetupAccess the Initial Set screen Guide Program Number50 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK 52 EN Manual Channel SetSelect the item Delete a ChannelChange Station Channel Position Delete a channelSet Stations a 54 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen56 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 58 ENPower 60 EN RecordingOther Problems 62 EN PlaybackLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines S-VHS64 EN Memo 66 EN